Ogg Vorbis 介绍以及Spec.

os posted @ 2013年9月28日 10:09 in MM Knowledge , 1889 阅读

http://xiph.org/vorbis/doc/Vorbis_I_spec.html

 

Ogg Vorbis

目 录
 
 

1OGG Vobis

Ogg全称应该是OGG Vorbis是一种新的音频压缩格式,类似于MP3等现有的音乐格式。但有一点不同的是,它是完全免费、开放和没有专利限制的。OGG Vorbis有一个很出众的特点,就是支持多声道,随着它的流行,以后用随身听来听DTS编码的多声道作品将不会是梦想。
Vorbis 是这种音频压缩机制的名字,而Ogg则是一个计划的名字,该计划意图设计一个完全开放性的多媒体系统。目前该计划只实现了OggVorbis这一部分。
Ogg Vorbis文件的扩展名是.OGG。这种文件的设计格式是非常先进的。现在创建的OGG文件可以在未来的任何播放器上播放,因此,这种文件格式可以不断地进行大小和音质的改良,而不影响旧有的编码器或播放器。

2问与答

■为何要使用Ogg Vorbis格式呢?
众所周知,MP3是有损压缩格式,因此压缩后的数据与标准的CD音乐相比是有损失的。VORBIS也是有损压缩,但通过使用更加先进的声学模型去减少损失,因此,同样位速率(Bit Rate)编码的OGG与MP3相比听起来更好一些。另外,还有一个原因,MP3格式是受专利保护的。如果你想使用MP3格式发布自己的作品,则需要付给 Fraunhofer(发明MP3的公司)专利使用费。而VORBIS就完全没有这个问题。对于乐迷来说,使用OGG文件的显著好处是可以用更小的文件获得优越的声音质量。而且,由于OGG是完全开放和免费的,制作OGG文件将不受任何专利限制,可望可以获得大量的编码器和播放器。这也是为何现在MP3编码器如此少而且大多是商业软件的原因,因为Fraunhofer要收取专利使用费。
讲了这么多,其实声音质量才是大家最关心的问题。
■Ogg Vorbis的音质真能比得上MP3吗?
由于Vorbis 使用了与MP3相比完全不同的数学原理,因此在压缩音乐时受到的挑战也不同。在当前的聆听测试中,同样位速率编码的Vorbis 和MP3 文件具有同等的声音质量。
■Ogg Vorbis的声音质量会继续改进吗?
是的。由于Vorbis使用了一种灵活的格式,能够在文件格式已经固定下来后还能对音质进行明显的调节和新算法训练。因此,它的声音质量将会越来越好。
由于Ogg目前仍处于BETA测试阶段,因此,现阶段的编码器仍存在着一些未解决的问题。Ogg的开发人员已经承诺将于下一个BETA版本改进现存的问题。关键的一点是,这些问题只是由于软件的编写而导致的,与Ogg格式本身所使用的算法无关。
■Ogg的文件大小如何与MP3进行比较?
如果两个文件都是以同样的位速率和CBR(常量位速率,指文件从头到尾都是一种位速率)方式来编码的话,那他们的大小肯定相同。当前 Vorbis 是以VBR(可变位速率)方式编码的,这使得Ogg的文件可以更小,因为VBR方式可以处理能大幅度进行压缩的音频数据(比如无声的时段)而节省空间。
■Vorbis能以什么位速率进行编码?
理论上,没有固定的位速率。Vorbis的设计是可以以16kbps~128kbps/通道的位速率进行编码。但规格说明中并没有限制你将文件以512kbps或8kbps方式编码。
■Ogg Vorbis支持类似于MP3的ID3信息吗?
支持。Vorbis格式中包括有一个灵活而又完整的注释栏,可用于填写各种相关信息。
■编码/解码器能有多快?
当前的编码/解码器在速度上已经接近一些商业级别的编码解码器了。由于现在还没有对程序进行优化,相信等一切完成后,至少可以跟MP3持平。
■Ogg Vorbis格式支持流式播放吗?
音频流是Vorbis的一个重要组成部分.vorbis格式从设计的一开始就是立足于可以容易地进行流式处理。并且,Vorbis的设计者正与 Icecast 流媒体软件的创造者一起使Icecast兼容 Vorbis。待正式版推出时,将会有各种各样支持流式OGG播放的软件或软件插件出现。
■目前有什么软硬件支持Ogg Vorbis?
迄今为止,Sonique、FreeAmp、Winamp、XMMS和kmpg都支持通过插件播放Ogg Vorbis文件。鉴于这些软件的影响力,将会有更多的软件支持OGG格式。另外,两个最流行的MP3编码器:LAME和BladeEnc,也宣布他们将支持编码Ogg Vorbis文件。
■Ogg Vorbis有什么独一无二的特性?
Vorbis具有一个设计良好、灵活的注释,避免了象MP3文件的ID3标记那样烦琐的操作; Vorbis还具有位速率缩放:可以不用重新编码便可调节文件的位速率。Vorbis文件可以被分成小块并以样本粒度进行编辑;Vorbis支持多通道; Vorbis文件可以以逻辑方式相连接等。
■那里可以找到相关的软件以及开发信息等资料下载?
ogg-vorbis[1],这是Ogg Vorbis的官方站点
■如何制作OGG音乐格式文件
OGG格式的音乐文件现在没有大规模普及,一般我们需要用CD唱片或网上下载的其它格式转换。先介绍一下Ogg编码的一些知识,Ogg的编码中的比特率选项主要有ABR、VBR和Quality三种,其实Ogg的比特率都是可变的,推荐使用设置简单Quality模式,能满足大多数人要求。
下面的列表是Quality的等级划分和对应的比特率
面将介绍常用的转换OGG格式的方法:
转换OGG格式的方法有很多,但最简单的方法是就是用Foobar2000+OGGENC外部编码器。Foobar2000现在很流行,它是一个Windows 平台下的高级音频播放器。不仅音质很出色,功能也很强大。Foobar2000支持WAV、AIFF、VOC、 AU、SND、Ogg Vorbis、MPC、MP2、MP3等音乐格式,通过插件还能支持MPEG-4、AAC、FLAC、Ogg、FLAC、Monkey“sAudio、WavPack、Speex、CDDA、SPC及各种MOD类型,相信支持的类型是已经足够了。利用Foobar2000的转换功能,可以方便的其它的音频格式转换成OGG格式。
Foobar2000转换OGG需要OGG外部编码器的支持(OGGENC),可供选择的OGGENC外部编码器版本很多,音质也有些细微的差距.
基于目前音质最好的aoTuV beta 4.51制作的编码器 使用SSE大幅优化了编码速度 非常快
oggenc[2]
这是一个命令行编码器 可以在foobar2000 / EAC / 千千静听等软件中方便的调用
比如在foobar2000中 大家用鼠标选中要转换的歌曲,右键点击,选中“转换”,然后选择“转换到同目录”,这样你就不用找转换出来的歌了。FOOBAR会弹出个“转换器设置”,在“编码预置”里选择“Ogg Vorbis"。FOOBAR默认的是Q5。我们可以点击“。。。”,然后在“命令行编码器设置”将品质拉到最右边即是最高品质Q10了!设置好后,点击“确定”开始转换咯!如果没有设置好OGG编码器的为止,FOOBAR会弹出提示叫你选择OGG编码器的位置。
千千静听中,把想转的歌曲加入到千千静听,在歌曲上右键点转换格式 - 输出格式中选命令行编码器1.0,点击“配置”- 新建1个编码器方案,名称任意 - 把编码程序改为刚才下载的那个ogg编码器 - 扩展名为ogg,命令参数为:-q10 - -o "%d" ,其余默认 - 确认后点击“立即转换”,OK了,等吧。不是Q10的话把"10"改成对应的数字即可。用Easy CD-DA Extractor 9转起来更方便,但是选择第三方编码器时比较麻烦。
3.选择合适的OGG编码品质
目前新一代的MP3播放器都增加了对OGG格式支持,比如说魅族的MINIPLAYER(支持OGG/Q-1~Q10)。如果你选购的是小容量版本,建议使用Q2和Q4品质的OGG。 Q2品质的歌曲文件的音质水平全面超过了128KBPS码率的MP3,而文件体积却还要下1/4以上,无疑是音质和体积的很好结合,适合绝大多数普通用户。事实上即使Q0品质的音质就超过了同样采用64Kbps码率的WMA格式,非常接近128KBPS码率的MP3,而64k的wma的音质根本无法达到128kmp3的水平。如果不是很挑剔音质的用户用Q0品质也完全没有任何问题。
对于音质要求较高的朋友可以选择使用Q4品质的OGG,Q4品质的OGG文件体积与128K MP3相当,而音质超过了Lame压缩的192Kbps/VBR MP3,这一点对支持OGG的数码播放器用户很具有吸引力——同样的容量下你存储更多高音质歌曲。对于容量较高切对希望用数码播放器达到CD随身听音质的发烧友来说,Q10品质的OGG无疑是一个福音,Q10的OGG从频谱上看基本和WAV文件完全一致,而体积只有后者的1/3,一首4分钟的歌曲大约有10MB左右。
在支持OGG/Q10格式的数码音乐播放器诞生之前,很多注重音质的朋友对MP3格式并不感冒——即使普通人也能听出来无损的CD音轨和最高品质的320Kbps码率MP3的音质区别。想魅族的MINIPLAYER之类的新一代高音质MP3播放器配合OGG/Q10格式有完全取代CD随身听的实力。Q5、Q6音质也非常优秀,可以达到256Kbps MP3以上的音质水平,也是对音质和体积很好的折衷,可以根据个人需要自己选择。

3总结

新一代OGG格式的流行,能以更低的码率和文件体积欣赏到音质更高的音乐歌曲,同时也使得数码随身听设备有了真正取代CD随身听的资本,非常值得我们期待。心动的朋友不妨赶紧体验一下,将自己喜好的CD转换成小巧方便的OGG格式,为自己打造HI-FI级的随身音乐世界。

 

 

Contents

1 Introduction and Description
1.1 Overview
1.1.1 Application
1.1.2 Classification
1.1.3 Assumptions
1.1.4 Codec Setup and Probability Model
1.1.5 Format Specification
1.1.6 Hardware Profile
1.2 Decoder Configuration
1.2.1 Global Config
1.2.2 Mode
1.2.3 Mapping
1.2.4 Floor
1.2.5 Residue
1.2.6 Codebooks
1.3 High-level Decode Process
1.3.1 Decode Setup
1.3.2 Decode Procedure
2 Bitpacking Convention
2.1 Overview
2.1.1 octets, bytes and words
2.1.2 bit order
2.1.3 byte order
2.1.4 coding bits into byte sequences
2.1.5 signedness
2.1.6 coding example
2.1.7 decoding example
2.1.8 end-of-packet alignment
2.1.9 reading zero bits
3 Probability Model and Codebooks
3.1 Overview
3.1.1 Bitwise operation
3.2 Packed codebook format
3.2.1 codebook decode
3.3 Use of the codebook abstraction
4 Codec Setup and Packet Decode
4.1 Overview
4.2 Header decode and decode setup
4.2.1 Common header decode
4.2.2 Identification header
4.2.3 Comment header
4.2.4 Setup header
4.3 Audio packet decode and synthesis
4.3.1 packet type, mode and window decode
4.3.2 floor curve decode
4.3.3 nonzero vector propagate
4.3.4 residue decode
4.3.5 inverse coupling
4.3.6 dot product
4.3.7 inverse MDCT
4.3.8 overlap_add
4.3.9 output channel order
5 comment field and header specification
5.1 Overview
5.2 Comment encoding
5.2.1 Structure
5.2.2 Content vector format
5.2.3 Encoding
6 Floor type 0 setup and decode
6.1 Overview
6.2 Floor 0 format
6.2.1 header decode
6.2.2 packet decode
6.2.3 curve computation
7 Floor type 1 setup and decode
7.1 Overview
7.2 Floor 1 format
7.2.1 model
7.2.2 header decode
7.2.3 packet decode
7.2.4 curve computation
8 Residue setup and decode
8.1 Overview
8.2 Residue format
8.3 residue 0
8.4 residue 1
8.5 residue 2
8.6 Residue decode
8.6.1 header decode
8.6.2 packet decode
8.6.3 format 0 specifics
8.6.4 format 1 specifics
8.6.5 format 2 specifics
9 Helper equations
9.1 Overview
9.2 Functions
9.2.1 ilog
9.2.2 float32_unpack
9.2.3 lookup1_values
9.2.4 low_neighbor
9.2.5 high_neighbor
9.2.6 render_point
9.2.7 render_line
10 Tables
10.1 floor1_inverse_dB_table
A Embedding Vorbis into an Ogg stream
A.1 Overview
A.1.1 Restrictions
A.1.2 MIME type
A.2 Encapsulation
B Vorbis encapsulation in RTP

1. Introduction and Description

 

1.1. Overview

This document provides a high level description of the Vorbis codec’s construction. A bit-by-bit specification appears beginning in Section 4, “Codec Setup and Packet Decode”. The later sections assume a high-level understanding of the Vorbis decode process, which is provided here.

 

1.1.1. Application

Vorbis is a general purpose perceptual audio CODEC intended to allow maximum encoder flexibility, thus allowing it to scale competitively over an exceptionally wide range of bitrates. At the high quality/bitrate end of the scale (CD or DAT rate stereo, 16/24 bits) it is in the same league as MPEG-2 and MPC. Similarly, the 1.0 encoder can encode high-quality CD and DAT rate stereo at below 48kbps without resampling to a lower rate. Vorbis is also intended for lower and higher sample rates (from 8kHz telephony to 192kHz digital masters) and a range of channel representations (monaural, polyphonic, stereo, quadraphonic, 5.1, ambisonic, or up to 255 discrete channels).

 

1.1.2. Classification

Vorbis I is a forward-adaptive monolithic transform CODEC based on the Modified Discrete Cosine Transform. The codec is structured to allow addition of a hybrid wavelet filterbank in Vorbis II to offer better transient response and reproduction using a transform better suited to localized time events.

 

1.1.3. Assumptions

The Vorbis CODEC design assumes a complex, psychoacoustically-aware encoder and simple, low-complexity decoder. Vorbis decode is computationally simpler than mp3, although it does require more working memory as Vorbis has no static probability model; the vector codebooks used in the first stage of decoding from the bitstream are packed in their entirety into the Vorbis bitstream headers. In packed form, these codebooks occupy only a few kilobytes; the extent to which they are pre-decoded into a cache is the dominant factor in decoder memory usage.

Vorbis provides none of its own framing, synchronization or protection against errors; it is solely a method of accepting input audio, dividing it into individual frames and compressing these frames into raw, unformatted ’packets’. The decoder then accepts these raw packets in sequence, decodes them, synthesizes audio frames from them, and reassembles the frames into a facsimile of the original audio stream. Vorbis is a free-form variable bit rate (VBR) codec and packets have no minimum size, maximum size, or fixed/expected size. Packets are designed that they may be truncated (or padded) and remain decodable; this is not to be considered an error condition and is used extensively in bitrate management in peeling. Both the transport mechanism and decoder must allow that a packet may be any size, or end before or after packet decode expects.

Vorbis packets are thus intended to be used with a transport mechanism that provides free-form framing, sync, positioning and error correction in accordance with these design assumptions, such as Ogg (for file transport) or RTP (for network multicast). For purposes of a few examples in this document, we will assume that Vorbis is to be embedded in an Ogg stream specifically, although this is by no means a requirement or fundamental assumption in the Vorbis design.

The specification for embedding Vorbis into an Ogg transport stream is in Section A,“Embedding Vorbis into an Ogg stream”.

 

1.1.4. Codec Setup and Probability Model

Vorbis’ heritage is as a research CODEC and its current design reflects a desire to allow multiple decades of continuous encoder improvement before running out of room within the codec specification. For these reasons, configurable aspects of codec setup intentionally lean toward the extreme of forward adaptive.

The single most controversial design decision in Vorbis (and the most unusual for a Vorbis developer to keep in mind) is that the entire probability model of the codec, the Huffman and VQ codebooks, is packed into the bitstream header along with extensive CODEC setup parameters (often several hundred fields). This makes it impossible, as it would be with MPEG audio layers, to embed a simple frame type flag in each audio packet, or begin decode at any frame in the stream without having previously fetched the codec setup header.

Note: Vorbis can initiate decode at any arbitrary packet within a bitstream so long as the codec has been initialized/setup with the setup headers.

Thus, Vorbis headers are both required for decode to begin and relatively large as bitstream headers go. The header size is unbounded, although for streaming a rule-of-thumb of 4kB or less is recommended (and Xiph.Org’s Vorbis encoder follows this suggestion).

Our own design work indicates the primary liability of the required header is in mindshare; it is an unusual design and thus causes some amount of complaint among engineers as this runs against current design trends (and also points out limitations in some existing software/interface designs, such as Windows’ ACM codec framework). However, we find that it does not fundamentally limit Vorbis’ suitable application space.

 

1.1.5. Format Specification

The Vorbis format is well-defined by its decode specification; any encoder that produces packets that are correctly decoded by the reference Vorbis decoder described below may be considered a proper Vorbis encoder. A decoder must faithfully and completely implement the specification defined below (except where noted) to be considered a proper Vorbis decoder.

 

1.1.6. Hardware Profile

Although Vorbis decode is computationally simple, it may still run into specific limitations of an embedded design. For this reason, embedded designs are allowed to deviate in limited ways from the ‘full’ decode specification yet still be certified compliant. These optional omissions are labelled in the spec where relevant.

 

1.2. Decoder Configuration

Decoder setup consists of configuration of multiple, self-contained component abstractions that perform specific functions in the decode pipeline. Each different component instance of a specific type is semantically interchangeable; decoder configuration consists both of internal component configuration, as well as arrangement of specific instances into a decode pipeline. Componentry arrangement is roughly as follows:

PIC


Figure 1: decoder pipeline configuration

 

1.2.1. Global Config

Global codec configuration consists of a few audio related fields (sample rate, channels), Vorbis version (always ’0’ in Vorbis I), bitrate hints, and the lists of component instances. All other configuration is in the context of specific components.

 

1.2.2. Mode

Each Vorbis frame is coded according to a master ’mode’. A bitstream may use one or many modes.

The mode mechanism is used to encode a frame according to one of multiple possible methods with the intention of choosing a method best suited to that frame. Different modes are, e.g. how frame size is changed from frame to frame. The mode number of a frame serves as a top level configuration switch for all other specific aspects of frame decode.

A ’mode’ configuration consists of a frame size setting, window type (always 0, the Vorbis window, in Vorbis I), transform type (always type 0, the MDCT, in Vorbis I) and a mapping number. The mapping number specifies which mapping configuration instance to use for low-level packet decode and synthesis.

 

1.2.3. Mapping

A mapping contains a channel coupling description and a list of ’submaps’ that bundle sets of channel vectors together for grouped encoding and decoding. These submaps are not references to external components; the submap list is internal and specific to a mapping.

A ’submap’ is a configuration/grouping that applies to a subset of floor and residue vectors within a mapping. The submap functions as a last layer of indirection such that specific special floor or residue settings can be applied not only to all the vectors in a given mode, but also specific vectors in a specific mode. Each submap specifies the proper floor and residue instance number to use for decoding that submap’s spectral floor and spectral residue vectors.

As an example:

Assume a Vorbis stream that contains six channels in the standard 5.1 format. The sixth channel, as is normal in 5.1, is bass only. Therefore it would be wasteful to encode a full-spectrum version of it as with the other channels. The submapping mechanism can be used to apply a full range floor and residue encoding to channels 0 through 4, and a bass-only representation to the bass channel, thus saving space. In this example, channels 0-4 belong to submap 0 (which indicates use of a full-range floor) and channel 5 belongs to submap 1, which uses a bass-only representation.

 

1.2.4. Floor

Vorbis encodes a spectral ’floor’ vector for each PCM channel. This vector is a low-resolution representation of the audio spectrum for the given channel in the current frame, generally used akin to a whitening filter. It is named a ’floor’ because the Xiph.Org reference encoder has historically used it as a unit-baseline for spectral resolution.

A floor encoding may be of two types. Floor 0 uses a packed LSP representation on a dB amplitude scale and Bark frequency scale. Floor 1 represents the curve as a piecewise linear interpolated representation on a dB amplitude scale and linear frequency scale. The two floors are semantically interchangeable in encoding/decoding. However, floor type 1 provides more stable inter-frame behavior, and so is the preferred choice in all coupled-stereo and high bitrate modes. Floor 1 is also considerably less expensive to decode than floor 0.

Floor 0 is not to be considered deprecated, but it is of limited modern use. No known Vorbis encoder past Xiph.Org’s own beta 4 makes use of floor 0.

The values coded/decoded by a floor are both compactly formatted and make use of entropy coding to save space. For this reason, a floor configuration generally refers to multiple codebooks in the codebook component list. Entropy coding is thus provided as an abstraction, and each floor instance may choose from any and all available codebooks when coding/decoding.

 

1.2.5. Residue

The spectral residue is the fine structure of the audio spectrum once the floor curve has been subtracted out. In simplest terms, it is coded in the bitstream using cascaded (multi-pass) vector quantization according to one of three specific packing/coding algorithms numbered 0 through 2. The packing algorithm details are configured by residue instance. As with the floor components, the final VQ/entropy encoding is provided by external codebook instances and each residue instance may choose from any and all available codebooks.

 

1.2.6. Codebooks

Codebooks are a self-contained abstraction that perform entropy decoding and, optionally, use the entropy-decoded integer value as an offset into an index of output value vectors, returning the indicated vector of values.

The entropy coding in a Vorbis I codebook is provided by a standard Huffman binary tree representation. This tree is tightly packed using one of several methods, depending on whether codeword lengths are ordered or unordered, or the tree is sparse.

The codebook vector index is similarly packed according to index characteristic. Most commonly, the vector index is encoded as a single list of values of possible values that are then permuted into a list of n-dimensional rows (lattice VQ).

 

1.3. High-level Decode Process

 

1.3.1. Decode Setup

Before decoding can begin, a decoder must initialize using the bitstream headers matching the stream to be decoded. Vorbis uses three header packets; all are required, in-order, by this specification. Once set up, decode may begin at any audio packet belonging to the Vorbis stream. In Vorbis I, all packets after the three initial headers are audio packets.

The header packets are, in order, the identification header, the comments header, and the setup header.

Identification HeaderThe identification header identifies the bitstream as Vorbis, Vorbis version, and the simple audio characteristics of the stream such as sample rate and number of channels.

Comment HeaderThe comment header includes user text comments (“tags”) and a vendor string for the application/library that produced the bitstream. The encoding and proper use of the comment header is described in Section 5, “comment field and header specification”.

Setup HeaderThe setup header includes extensive CODEC setup information as well as the complete VQ and Huffman codebooks needed for decode.

 

1.3.2. Decode Procedure

The decoding and synthesis procedure for all audio packets is fundamentally the same.

1.
decode packet type flag
2.
decode mode number
3.
decode window shape (long windows only)
4.
decode floor
5.
decode residue into residue vectors
6.
inverse channel coupling of residue vectors
7.
generate floor curve from decoded floor data
8.
compute dot product of floor and residue, producing audio spectrum vector
9.
inverse monolithic transform of audio spectrum vector, always an MDCT in Vorbis I
10.
overlap/add left-hand output of transform with right-hand output of previous frame
11.
store right hand-data from transform of current frame for future lapping
12.
if not first frame, return results of overlap/add as audio result of current frame

Note that clever rearrangement of the synthesis arithmetic is possible; as an example, one can take advantage of symmetries in the MDCT to store the right-hand transform data of a partial MDCT for a 50% inter-frame buffer space savings, and then complete the transform later before overlap/add with the next frame. This optimization produces entirely equivalent output and is naturally perfectly legal. The decoder must be entirely mathematically equivalent to the specification, it need not be a literal semantic implementation.

Packet type decodeVorbis I uses four packet types. The first three packet types mark each of the three Vorbis headers described above. The fourth packet type marks an audio packet. All other packet types are reserved; packets marked with a reserved type should be ignored.

Following the three header packets, all packets in a Vorbis I stream are audio. The first step of audio packet decode is to read and verify the packet type; a non-audio packet when audio isexpected indicates stream corruption or a non-compliant stream. The decoder must ignore thepacket and not attempt decoding it to audio.

Mode decodeVorbis allows an encoder to set up multiple, numbered packet ’modes’, as described earlier, all of which may be used in a given Vorbis stream. The mode is encoded as an integer used as a direct offset into the mode instance index.

Window shape decode (long windows only)Vorbis frames may be one of two PCM sample sizes specified during codec setup. In Vorbis I, legal frame sizes are powers of two from 64 to 8192 samples. Aside from coupling, Vorbis handles channels as independent vectors and these frame sizes are in samples per channel.

Vorbis uses an overlapping transform, namely the MDCT, to blend one frame into the next, avoiding most inter-frame block boundary artifacts. The MDCT output of one frame is windowed according to MDCT requirements, overlapped 50% with the output of the previous frame and added. The window shape assures seamless reconstruction.

This is easy to visualize in the case of equal sized-windows:

PIC


Figure 2: overlap of two equal-sized windows

And slightly more complex in the case of overlapping unequal sized windows:

PIC


Figure 3: overlap of a long and a short window

In the unequal-sized window case, the window shape of the long window must be modified for seamless lapping as above. It is possible to correctly infer window shape to be applied to the current window from knowing the sizes of the current, previous and next window. It is legal for a decoder to use this method. However, in the case of a long window (short windows require no modification), Vorbis also codes two flag bits to specify pre- and post- window shape. Although not strictly necessary for function, this minor redundancy allows a packet to be fully decoded to the point of lapping entirely independently of any other packet, allowing easier abstraction of decode layers as well as allowing a greater level of easy parallelism in encode and decode.

A description of valid window functions for use with an inverse MDCT can be found in [1]. Vorbis windows all use the slope function

y = sin (.5 ∗ π sin2((x + .5)∕n ∗ π)).

floor decodeEach floor is encoded/decoded in channel order, however each floor belongs to a ’submap’ that specifies which floor configuration to use. All floors are decoded before residue decode begins.

residue decodeAlthough the number of residue vectors equals the number of channels, channel coupling may mean that the raw residue vectors extracted during decode do not map directly to specific channels. When channel coupling is in use, some vectors will correspond to coupled magnitude or angle. The coupling relationships are described in the codec setup and may differ from frame to frame, due to different mode numbers.

Vorbis codes residue vectors in groups by submap; the coding is done in submap order from submap 0 through n-1. This differs from floors which are coded using a configuration provided by submap number, but are coded individually in channel order.

inverse channel couplingA detailed discussion of stereo in the Vorbis codec can be found in the documentStereo Channel Coupling in the Vorbis CODEC. Vorbis is not limited to only stereocoupling, but the stereo document also gives a good overview of the generic coupling mechanism.

Vorbis coupling applies to pairs of residue vectors at a time; decoupling is done in-place a pair at a time in the order and using the vectors specified in the current mapping configuration. The decoupling operation is the same for all pairs, converting square polar representation (where one vector is magnitude and the second angle) back to Cartesian representation.

After decoupling, in order, each pair of vectors on the coupling list, the resulting residue vectors represent the fine spectral detail of each output channel.

generate floor curveThe decoder may choose to generate the floor curve at any appropriate time. It is reasonable to generate the output curve when the floor data is decoded from the raw packet, or it can be generated after inverse coupling and applied to the spectral residue directly, combining generation and the dot product into one step and eliminating some working space.

Both floor 0 and floor 1 generate a linear-range, linear-domain output vector to be multiplied (dot product) by the linear-range, linear-domain spectral residue.

compute floor/residue dot productThis step is straightforward; for each output channel, the decoder multiplies the floor curve and residue vectors element by element, producing the finished audio spectrum of each channel.

One point is worth mentioning about this dot product; a common mistake in a fixed point implementation might be to assume that a 32 bit fixed-point representation for floor and residue and direct multiplication of the vectors is sufficient for acceptable spectral depth in all cases because it happens to mostly work with the current Xiph.Org reference encoder.

However, floor vector values can span 140dB (24 bits unsigned), and the audio spectrum vector should represent a minimum of 120dB (21 bits with sign), even when output is to a 16 bit PCM device. For the residue vector to represent full scale if the floor is nailed to 140dB, it must be able to span 0 to +140dB. For the residue vector to reach full scale if the floor is nailed at 0dB, it must be able to represent 140dB to +0dB. Thus, in order to handle full range dynamics, a residue vector may span 140dB to +140dB entirely within spec. A 280dB range is approximately 48 bits with sign; thus the residue vector must be able to represent a 48 bit range and the dot product must be able to handle an effective 48 bit times 24 bit multiplication. This range may be achieved using large (64 bit or larger) integers, or implementing a movable binary point representation.

inverse monolithic transform (MDCT)The audio spectrum is converted back into time domain PCM audio via an inverse Modified Discrete Cosine Transform (MDCT). A detailed description of the MDCT is available in[1].

Note that the PCM produced directly from the MDCT is not yet finished audio; it must be lapped with surrounding frames using an appropriate window (such as the Vorbis window) before the MDCT can be considered orthogonal.

overlap/add dataWindowed MDCT output is overlapped and added with the right hand data of the previous window such that the 3/4 point of the previous window is aligned with the 1/4 point of the current window (as illustrated in the window overlap diagram). At this point, the audio data between the center of the previous frame and the center of the current frame is now finished and ready to be returned.

cache right hand dataThe decoder must cache the right hand portion of the current frame to be lapped with the left hand portion of the next frame.

return finished audio dataThe overlapped portion produced from overlapping the previous and current frame data is finished data to be returned by the decoder. This data spans from the center of the previous window to the center of the current window. In the case of same-sized windows, the amount of data to return is one-half block consisting of and only of the overlapped portions. When overlapping a short and long window, much of the returned range is not actually overlap. This does not damage transform orthogonality. Pay attention however to returning the correct data range; the amount of data to be returned is:

 

1 window_blocksize(previous_window)/4+window_blocksize(current_window)/4

from the center of the previous window to the center of the current window.

Data is not returned from the first frame; it must be used to ’prime’ the decode engine. The encoder accounts for this priming when calculating PCM offsets; after the first frame, the proper PCM output offset is ’0’ (as no data has been returned yet).

2. Bitpacking Convention

 

2.1. Overview

The Vorbis codec uses relatively unstructured raw packets containing arbitrary-width binary integer fields. Logically, these packets are a bitstream in which bits are coded one-by-one by the encoder and then read one-by-one in the same monotonically increasing order by the decoder. Most current binary storage arrangements group bits into a native word size of eight bits (octets), sixteen bits, thirty-two bits or, less commonly other fixed word sizes. The Vorbis bitpacking convention specifies the correct mapping of the logical packet bitstream into an actual representation in fixed-width words.

 

2.1.1. octets, bytes and words

In most contemporary architectures, a ’byte’ is synonymous with an ’octet’, that is, eight bits. This has not always been the case; seven, ten, eleven and sixteen bit ’bytes’ have been used. For purposes of the bitpacking convention, a byte implies the native, smallest integer storage representation offered by a platform. On modern platforms, this is generally assumed to be eight bits (not necessarily because of the processor but because of the filesystem/memory architecture. Modern filesystems invariably offer bytes as the fundamental atom of storage). A ’word’ is an integer size that is a grouped multiple of this smallest size.

The most ubiquitous architectures today consider a ’byte’ to be an octet (eight bits) and a word to be a group of two, four or eight bytes (16, 32 or 64 bits). Note however that the Vorbis bitpacking convention is still well defined for any native byte size; Vorbis uses the native bit-width of a given storage system. This document assumes that a byte is one octet for purposes of example.

 

2.1.2. bit order

A byte has a well-defined ’least significant’ bit (LSb), which is the only bit set when the byte is storing the two’s complement integer value +1. A byte’s ’most significant’ bit (MSb) is at the opposite end of the byte. Bits in a byte are numbered from zero at the LSb to n (n = 7 in an octet) for the MSb.

 

2.1.3. byte order

Words are native groupings of multiple bytes. Several byte orderings are possible in a word; the common ones are 3-2-1-0 (’big endian’ or ’most significant byte first’ in which the highest-valued byte comes first), 0-1-2-3 (’little endian’ or ’least significant byte first’ in which the lowest value byte comes first) and less commonly 3-1-2-0 and 0-2-1-3 (’mixed endian’).

The Vorbis bitpacking convention specifies storage and bitstream manipulation at the byte, not word, level, thus host word ordering is of a concern only during optimization when writing high performance code that operates on a word of storage at a time rather than by byte. Logically, bytes are always coded and decoded in order from byte zero through byten.

 

2.1.4. coding bits into byte sequences

The Vorbis codec has need to code arbitrary bit-width integers, from zero to 32 bits wide, into packets. These integer fields are not aligned to the boundaries of the byte representation; the next field is written at the bit position at which the previous field ends.

The encoder logically packs integers by writing the LSb of a binary integer to the logical bitstream first, followed by next least significant bit, etc, until the requested number of bits have been coded. When packing the bits into bytes, the encoder begins by placing the LSb of the integer to be written into the least significant unused bit position of the destination byte, followed by the next-least significant bit of the source integer and so on up to the requested number of bits. When all bits of the destination byte have been filled, encoding continues by zeroing all bits of the next byte and writing the next bit into the bit position 0 of that byte. Decoding follows the same process as encoding, but by reading bits from the byte stream and reassembling them into integers.

 

2.1.5. signedness

The signedness of a specific number resulting from decode is to be interpreted by the decoder given decode context. That is, the three bit binary pattern ’b111’ can be taken to represent either ’seven’ as an unsigned integer, or ’-1’ as a signed, two’s complement integer. The encoder and decoder are responsible for knowing if fields are to be treated as signed or unsigned.

 

2.1.6. coding example

Code the 4 bit integer value ’12’ [b1100] into an empty bytestream. Bytestream result:

 

1 |
2 V
3
4 7 6 5 4 3 2 1 0
5 byte 0 [0 0 0 0 1 1 0 0] <-
6 byte 1 [ ]
7 byte 2 [ ]
8 byte 3 [ ]
9 ...
10 byte n [ ] bytestream length == 1 byte
11

Continue by coding the 3 bit integer value ’-1’ [b111]:

 

1 |
2 V
3
4 7 6 5 4 3 2 1 0
5 byte 0 [0 1 1 1 1 1 0 0] <-
6 byte 1 [ ]
7 byte 2 [ ]
8 byte 3 [ ]
9 ...
10 byte n [ ] bytestream length == 1 byte

Continue by coding the 7 bit integer value ’17’ [b0010001]:

 

1 |
2 V
3
4 7 6 5 4 3 2 1 0
5 byte 0 [1 1 1 1 1 1 0 0]
6 byte 1 [0 0 0 0 1 0 0 0] <-
7 byte 2 [ ]
8 byte 3 [ ]
9 ...
10 byte n [ ] bytestream length == 2 bytes
11 bit cursor == 6

Continue by coding the 13 bit integer value ’6969’ [b110 11001110 01]:

 

1 |
2 V
3
4 7 6 5 4 3 2 1 0
5 byte 0 [1 1 1 1 1 1 0 0]
6 byte 1 [0 1 0 0 1 0 0 0]
7 byte 2 [1 1 0 0 1 1 1 0]
8 byte 3 [0 0 0 0 0 1 1 0] <-
9 ...
10 byte n [ ] bytestream length == 4 bytes
11

 

2.1.7. decoding example

Reading from the beginning of the bytestream encoded in the above example:

 

1 |
2 V
3
4 7 6 5 4 3 2 1 0
5 byte 0 [1 1 1 1 1 1 0 0] <-
6 byte 1 [0 1 0 0 1 0 0 0]
7 byte 2 [1 1 0 0 1 1 1 0]
8 byte 3 [0 0 0 0 0 1 1 0] bytestream length == 4 bytes
9

We read two, two-bit integer fields, resulting in the returned numbers ’b00’ and ’b11’. Two things are worth noting here:

  • Although these four bits were originally written as a single four-bit integer, reading some other combination of bit-widths from the bitstream is well defined. There are no artificial alignment boundaries maintained in the bitstream.
  • The second value is the two-bit-wide integer ’b11’. This value may be interpreted either as the unsigned value ’3’, or the signed value ’-1’. Signedness is dependent on decode context.

 

2.1.8. end-of-packet alignment

The typical use of bitpacking is to produce many independent byte-aligned packets which are embedded into a larger byte-aligned container structure, such as an Ogg transport bitstream. Externally, each bytestream (encoded bitstream) must begin and end on a byte boundary. Often, the encoded bitstream is not an integer number of bytes, and so there is unused (uncoded) space in the last byte of a packet.

Unused space in the last byte of a bytestream is always zeroed during the coding process. Thus, should this unused space be read, it will return binary zeroes.

Attempting to read past the end of an encoded packet results in an ’end-of-packet’ condition. End-of-packet is not to be considered an error; it is merely a state indicating that there is insufficient remaining data to fulfill the desired read size. Vorbis uses truncated packets as a normal mode of operation, and as such, decoders must handle reading past the end of a packet as a typical mode of operation. Any further read operations after an ’end-of-packet’ condition shall also return ’end-of-packet’.

 

2.1.9. reading zero bits

Reading a zero-bit-wide integer returns the value ’0’ and does not increment the stream cursor. Reading to the end of the packet (but not past, such that an ’end-of-packet’ condition has not triggered) and then reading a zero bit integer shall succeed, returning 0, and not trigger an end-of-packet condition. Reading a zero-bit-wide integer after a previous read sets ’end-of-packet’shall also fail with ’end-of-packet’.

3. Probability Model and Codebooks

 

3.1. Overview

Unlike practically every other mainstream audio codec, Vorbis has no statically configured probability model, instead packing all entropy decoding configuration, VQ and Huffman, into the bitstream itself in the third header, the codec setup header. This packed configuration consists of multiple ’codebooks’, each containing a specific Huffman-equivalent representation for decoding compressed codewords as well as an optional lookup table of output vector values to which a decoded Huffman value is applied as an offset, generating the final decoded output corresponding to a given compressed codeword.

 

3.1.1. Bitwise operation

The codebook mechanism is built on top of the vorbis bitpacker. Both the codebooks themselves and the codewords they decode are unrolled from a packet as a series of arbitrary-width values read from the stream according to Section 2, “Bitpacking Convention”.

 

3.2. Packed codebook format

For purposes of the examples below, we assume that the storage system’s native byte width is eight bits. This is not universally true; see Section 2, “Bitpacking Convention” for discussion relating to non-eight-bit bytes.

 

3.2.1. codebook decode

A codebook begins with a 24 bit sync pattern, 0x564342:

 

1 byte 0: [ 0 1 0 0 0 0 1 0 ] (0x42)
2 byte 1: [ 0 1 0 0 0 0 1 1 ] (0x43)
3 byte 2: [ 0 1 0 1 0 1 1 0 ] (0x56)

16 bit [codebook_dimensions] and 24 bit [codebook_entries] fields:

 

1
2 byte 3: [ X X X X X X X X ]
3 byte 4: [ X X X X X X X X ] [codebook_dimensions] (16 bit unsigned)
4
5 byte 5: [ X X X X X X X X ]
6 byte 6: [ X X X X X X X X ]
7 byte 7: [ X X X X X X X X ] [codebook_entries] (24 bit unsigned)
8

Next is the [ordered] bit flag:

 

1
2 byte 8: [ X ] [ordered] (1 bit)
3

Each entry, numbering a total of [codebook_entries], is assigned a codeword length. We now read the list of codeword lengths and store these lengths in the array[codebook_codeword_lengths]. Decode of lengths is according to whether the [ordered] flag is set or unset.

  • If the [ordered] flag is unset, the codeword list is not length ordered and the decoder needs to read each codeword length one-by-one.

    The decoder first reads one additional bit flag, the [sparse] flag. This flag determines whether or not the codebook contains unused entries that are not to be included in the codeword decode tree:

     

    1 byte 8: [ X 1 ] [sparse] flag (1 bit)

    The decoder now performs for each of the [codebook_entries] codebook entries:

     

    1
    2 1) if([sparse] is set) {
    3
    4 2) [flag] = read one bit;
    5 3) if([flag] is set) {
    6
    7 4) [length] = read a five bit unsigned integer;
    8 5) codeword length for this entry is [length]+1;
    9
    10 } else {
    11
    12 6) this entry is unused. mark it as such.
    13
    14 }
    15
    16 } else the sparse flag is not set {
    17
    18 7) [length] = read a five bit unsigned integer;
    19 8) the codeword length for this entry is [length]+1;
    20
    21 }
    22
  • If the [ordered] flag is set, the codeword list for this codebook is encoded in ascending length order. Rather than reading a length for every codeword, the encoder reads the number of codewords per length. That is, beginning at entry zero:

     

    1 1) [current_entry] = 0;
    2 2) [current_length] = read a five bit unsigned integer and add 1;
    3 3) [number] = read ilog([codebook_entries] - [current_entry]) bits as an unsigned integer
    4 4) set the entries [current_entry] through [current_entry]+[number]-1, inclusive,
    5 of the [codebook_codeword_lengths] array to [current_length]
    6 5) set [current_entry] to [number] + [current_entry]
    7 6) increment [current_length] by 1
    8 7) if [current_entry] is greater than [codebook_entries] ERROR CONDITION;
    9 the decoder will not be able to read this stream.
    10 8) if [current_entry] is less than [codebook_entries], repeat process starting at 3)
    11 9) done.

After all codeword lengths have been decoded, the decoder reads the vector lookup table. Vorbis I supports three lookup types:

1.
No lookup
2.
Implicitly populated value mapping (lattice VQ)
3.
Explicitly populated value mapping (tessellated or ’foam’ VQ)

The lookup table type is read as a four bit unsigned integer:

1 1) [codebook_lookup_type] = read four bits as an unsigned integer

Codebook decode precedes according to [codebook_lookup_type]:

  • Lookup type zero indicates no lookup to be read. Proceed past lookup decode.
  • Lookup types one and two are similar, differing only in the number of lookup values to be read. Lookup type one reads a list of values that are permuted in a set pattern to build a list of vectors, each vector of order [codebook_dimensions] scalars. Lookup type two builds the same vector list, but reads each scalar for each vector explicitly, rather than building vectors from a smaller list of possible scalar values. Lookup decode proceeds as follows:

     

    1 1) [codebook_minimum_value] = float32_unpack( read 32 bits as an unsigned integer)
    2 2) [codebook_delta_value] = float32_unpack( read 32 bits as an unsigned integer)
    3 3) [codebook_value_bits] = read 4 bits as an unsigned integer and add 1
    4 4) [codebook_sequence_p] = read 1 bit as a boolean flag
    5
    6 if ( [codebook_lookup_type] is 1 ) {
    7
    8 5) [codebook_lookup_values] = lookup1_values([codebook_entries], [codebook_dimensions] )
    9
    10 } else {
    11
    12 6) [codebook_lookup_values] = [codebook_entries] * [codebook_dimensions]
    13
    14 }
    15
    16 7) read a total of [codebook_lookup_values] unsigned integers of [codebook_value_bits] each;
    17 store these in order in the array [codebook_multiplicands]
  • A [codebook_lookup_type] of greater than two is reserved and indicates a stream that is not decodable by the specification in this document.

An ’end of packet’ during any read operation in the above steps is considered an error condition rendering the stream undecodable.

Huffman decision tree representationThe [codebook_codeword_lengths] array and [codebook_entries] value uniquely define the Huffman decision tree used for entropy decoding.

Briefly, each used codebook entry (recall that length-unordered codebooks support unused codeword entries) is assigned, in order, the lowest valued unused binary Huffman codeword possible. Assume the following codeword length list:

 

1 entry 0: length 2
2 entry 1: length 4
3 entry 2: length 4
4 entry 3: length 4
5 entry 4: length 4
6 entry 5: length 2
7 entry 6: length 3
8 entry 7: length 3

Assigning codewords in order (lowest possible value of the appropriate length to highest) results in the following codeword list:

 

1 entry 0: length 2 codeword 00
2 entry 1: length 4 codeword 0100
3 entry 2: length 4 codeword 0101
4 entry 3: length 4 codeword 0110
5 entry 4: length 4 codeword 0111
6 entry 5: length 2 codeword 10
7 entry 6: length 3 codeword 110
8 entry 7: length 3 codeword 111

Note: Unlike most binary numerical values in this document, we intend the above codewords to be read and used bit by bit from left to right, thus the codeword ’001’ is the bit string ’zero, zero, one’. When determining ’lowest possible value’ in the assignment definition above, the leftmost bit is the MSb.

It is clear that the codeword length list represents a Huffman decision tree with the entry numbers equivalent to the leaves numbered left-to-right:

PIC


Figure 4: huffman tree illustration

As we assign codewords in order, we see that each choice constructs a new leaf in the leftmost possible position.

Note that it’s possible to underspecify or overspecify a Huffman tree via the length list. In the above example, if codeword seven were eliminated, it’s clear that the tree is unfinished:

PIC


Figure 5: underspecified huffman tree illustration

Similarly, in the original codebook, it’s clear that the tree is fully populated and a ninth codeword is impossible. Both underspecified and overspecified trees are an error condition rendering the stream undecodable. Take special care that a codebook with a single used entry is handled properly; it consists of a single codework of zero bits and ’reading’a value out of such a codebook always returns the single used value and sinks zero bits.

Codebook entries marked ’unused’ are simply skipped in the assigning process. They have no codeword and do not appear in the decision tree, thus it’s impossible for any bit pattern read from the stream to decode to that entry number.

VQ lookup table vector representationUnpacking the VQ lookup table vectors relies on the following values:

1 the [codebook\_multiplicands] array
2 [codebook\_minimum\_value]
3 [codebook\_delta\_value]
4 [codebook\_sequence\_p]
5 [codebook\_lookup\_type]
6 [codebook\_entries]
7 [codebook\_dimensions]
8 [codebook\_lookup\_values]

Decoding (unpacking) a specific vector in the vector lookup table proceeds according to[codebook_lookup_type]. The unpacked vector values are what a codebook would return during audio packet decode in a VQ context.

Vector value decode: Lookup type 1Lookup type one specifies a lattice VQ lookup table built algorithmically from a list of scalar values. Calculate (unpack) the final values of a codebook entry vector from the entries in [codebook_multiplicands] as follows ([value_vector] is the output vector representing the vector of values for entry number [lookup_offset] in this codebook):

 

1 1) [last] = 0;
2 2) [index_divisor] = 1;
3 3) iterate [i] over the range 0 ... [codebook_dimensions]-1 (once for each scalar value in the value vector) {
4
5 4) [multiplicand_offset] = ( [lookup_offset] divided by [index_divisor] using integer
6 division ) integer modulo [codebook_lookup_values]
7
8 5) vector [value_vector] element [i] =
9 ( [codebook_multiplicands] array element number [multiplicand_offset] ) *
10 [codebook_delta_value] + [codebook_minimum_value] + [last];
11
12 6) if ( [codebook_sequence_p] is set ) then set [last] = vector [value_vector] element [i]
13
14 7) [index_divisor] = [index_divisor] * [codebook_lookup_values]
15
16 }
17
18 8) vector calculation completed.

Vector value decode: Lookup type 2Lookup type two specifies a VQ lookup table in which each scalar in each vector is explicitly set by the [codebook_multiplicands] array in a one-to-one mapping. Calculate [unpack] the final values of a codebook entry vector from the entries in [codebook_multiplicands] as follows ([value_vector] is the output vector representing the vector of values for entry number[lookup_offset] in this codebook):

 

1 1) [last] = 0;
2 2) [multiplicand_offset] = [lookup_offset] * [codebook_dimensions]
3 3) iterate [i] over the range 0 ... [codebook_dimensions]-1 (once for each scalar value in the value vector) {
4
5 4) vector [value_vector] element [i] =
6 ( [codebook_multiplicands] array element number [multiplicand_offset] ) *
7 [codebook_delta_value] + [codebook_minimum_value] + [last];
8
9 5) if ( [codebook_sequence_p] is set ) then set [last] = vector [value_vector] element [i]
10
11 6) increment [multiplicand_offset]
12
13 }
14
15 7) vector calculation completed.

 

3.3. Use of the codebook abstraction

The decoder uses the codebook abstraction much as it does the bit-unpacking convention; a specific codebook reads a codeword from the bitstream, decoding it into an entry number, and then returns that entry number to the decoder (when used in a scalar entropy coding context), or uses that entry number as an offset into the VQ lookup table, returning a vector of values (when used in a context desiring a VQ value). Scalar or VQ context is always explicit; any call to the codebook mechanism requests either a scalar entry number or a lookup vector.

Note that VQ lookup type zero indicates that there is no lookup table; requesting decode using a codebook of lookup type 0 in any context expecting a vector return value (even in a case where a vector of dimension one) is forbidden. If decoder setup or decode requests such an action, that is an error condition rendering the packet undecodable.

Using a codebook to read from the packet bitstream consists first of reading and decoding the next codeword in the bitstream. The decoder reads bits until the accumulated bits match a codeword in the codebook. This process can be though of as logically walking the Huffman decode tree by reading one bit at a time from the bitstream, and using the bit as a decision boolean to take the 0 branch (left in the above examples) or the 1 branch (right in the above examples). Walking the tree finishes when the decode process hits a leaf in the decision tree; the result is the entry number corresponding to that leaf. Reading past the end of a packet propagates the ’end-of-stream’ condition to the decoder.

When used in a scalar context, the resulting codeword entry is the desired return value.

When used in a VQ context, the codeword entry number is used as an offset into the VQ lookup table. The value returned to the decoder is the vector of scalars corresponding to this offset.

4. Codec Setup and Packet Decode

 

4.1. Overview

This document serves as the top-level reference document for the bit-by-bit decode specification of Vorbis I. This document assumes a high-level understanding of the Vorbis decode process, which is provided in Section 1, “Introduction and Description”. Section 2,“Bitpacking Convention” covers reading and writing bit fields from and to bitstream packets.

 

4.2. Header decode and decode setup

A Vorbis bitstream begins with three header packets. The header packets are, in order, the identification header, the comments header, and the setup header. All are required for decode compliance. An end-of-packet condition during decoding the first or third header packet renders the stream undecodable. End-of-packet decoding the comment header is a non-fatal error condition.

 

4.2.1. Common header decode

Each header packet begins with the same header fields.

 

1 1) [packet_type] : 8 bit value
2 2) 0x76, 0x6f, 0x72, 0x62, 0x69, 0x73: the characters ’v’,’o’,’r’,’b’,’i’,’s’ as six octets

Decode continues according to packet type; the identification header is type 1, the comment header type 3 and the setup header type 5 (these types are all odd as a packet with a leading single bit of ’0’ is an audio packet). The packets must occur in the order of identification, comment, setup.

 

4.2.2. Identification header

The identification header is a short header of only a few fields used to declare the stream definitively as Vorbis, and provide a few externally relevant pieces of information about the audio stream. The identification header is coded as follows:

 

1 1) [vorbis_version] = read 32 bits as unsigned integer
2 2) [audio_channels] = read 8 bit integer as unsigned
3 3) [audio_sample_rate] = read 32 bits as unsigned integer
4 4) [bitrate_maximum] = read 32 bits as signed integer
5 5) [bitrate_nominal] = read 32 bits as signed integer
6 6) [bitrate_minimum] = read 32 bits as signed integer
7 7) [blocksize_0] = 2 exponent (read 4 bits as unsigned integer)
8 8) [blocksize_1] = 2 exponent (read 4 bits as unsigned integer)
9 9) [framing_flag] = read one bit

[vorbis_version] is to read ’0’ in order to be compatible with this document. Both[audio_channels] and [audio_sample_rate] must read greater than zero. Allowed final blocksize values are 64, 128, 256, 512, 1024, 2048, 4096 and 8192 in Vorbis I. [blocksize_0]must be less than or equal to [blocksize_1]. The framing bit must be nonzero. Failure to meet any of these conditions renders a stream undecodable.

The bitrate fields above are used only as hints. The nominal bitrate field especially may be considerably off in purely VBR streams. The fields are meaningful only when greater than zero.

  • All three fields set to the same value implies a fixed rate, or tightly bounded, nearly fixed-rate bitstream
  • Only nominal set implies a VBR or ABR stream that averages the nominal bitrate
  • Maximum and or minimum set implies a VBR bitstream that obeys the bitrate limits
  • None set indicates the encoder does not care to speculate.

 

4.2.3. Comment header

Comment header decode and data specification is covered in Section 5, “comment field and header specification”.

 

4.2.4. Setup header

Vorbis codec setup is configurable to an extreme degree:

PIC


Figure 6: decoder pipeline configuration

The setup header contains the bulk of the codec setup information needed for decode. The setup header contains, in order, the lists of codebook configurations, time-domain transform configurations (placeholders in Vorbis I), floor configurations, residue configurations, channel mapping configurations and mode configurations. It finishes with a framing bit of ’1’. Header decode proceeds in the following order:

Codebooks

1.
[vorbis_codebook_count] = read eight bits as unsigned integer and add one
2.
Decode [vorbis_codebook_count] codebooks in order as defined in Section 3, “Probability Model and Codebooks”. Save each configuration, in order, in an array of codebook configurations [vorbis_codebook_configurations].

Time domain transformsThese hooks are placeholders in Vorbis I. Nevertheless, the configuration placeholder values must be read to maintain bitstream sync.

 

1.
[vorbis_time_count] = read 6 bits as unsigned integer and add one
2.
read [vorbis_time_count] 16 bit values; each value should be zero. If any value is nonzero, this is an error condition and the stream is undecodable.

FloorsVorbis uses two floor types; header decode is handed to the decode abstraction of the appropriate type.

 

1.
[vorbis_floor_count] = read 6 bits as unsigned integer and add one
2.
For each [i] of [vorbis_floor_count] floor numbers:
a)
read the floor type: vector [vorbis_floor_types] element [i] = read 16 bits as unsigned integer
b)
If the floor type is zero, decode the floor configuration as defined in Section 6, “Floor type 0 setup and decode”; save this configuration in slot [i] of the floor configuration array [vorbis_floor_configurations].
c)
If the floor type is one, decode the floor configuration as defined in Section 7, “Floor type 1 setup and decode”; save this configuration in slot [i] of the floor configuration array [vorbis_floor_configurations].
d)
If the the floor type is greater than one, this stream is undecodable; ERROR CONDITION

ResiduesVorbis uses three residue types; header decode of each type is identical.

 

1.
[vorbis_residue_count] = read 6 bits as unsigned integer and add one
2.
For each of [vorbis_residue_count] residue numbers:
a)
read the residue type; vector [vorbis_residue_types] element [i] = read 16 bits as unsigned integer
b)
If the residue type is zero, one or two, decode the residue configuration as defined in Section 8, “Residue setup and decode”; save this configuration in slot [i] of the residue configuration array [vorbis_residue_configurations].
c)
If the the residue type is greater than two, this stream is undecodable; ERROR CONDITION

MappingsMappings are used to set up specific pipelines for encoding multichannel audio with varying channel mapping applications. Vorbis I uses a single mapping type (0), with implicit PCM channel mappings.

 

1.
[vorbis_mapping_count] = read 6 bits as unsigned integer and add one
2.
For each [i] of [vorbis_mapping_count] mapping numbers:
a)
read the mapping type: 16 bits as unsigned integer. There’s no reason to save the mapping type in Vorbis I.
b)
If the mapping type is nonzero, the stream is undecodable
c)
If the mapping type is zero:
i.
read 1 bit as a boolean flag
A.
if set, [vorbis_mapping_submaps] = read 4 bits as unsigned integer and add one
B.
if unset, [vorbis_mapping_submaps] = 1
ii.
read 1 bit as a boolean flag
A.
if set, square polar channel mapping is in use:
  • [vorbis_mapping_coupling_steps] = read 8 bits as unsigned integer and add one
  • for [j] each of [vorbis_mapping_coupling_steps] steps:
    • vector [vorbis_mapping_magnitude] element [j]= read ilog([audio_channels] - 1) bits as unsigned integer
    • vector [vorbis_mapping_angle] element [j]= read ilog([audio_channels] - 1) bits as unsigned integer
    • the numbers read in the above two steps are channel numbers representing the channel to treat as magnitude and the channel to treat as angle, respectively. If for any coupling step the angle channel number equals the magnitude channel number, the magnitude channel number is greater than [audio_channels]-1, or the angle channel is greater than [audio_channels]-1, the stream is undecodable.
B.
if unset, [vorbis_mapping_coupling_steps] = 0
iii.
read 2 bits (reserved field); if the value is nonzero, the stream is undecodable
iv.
if [vorbis_mapping_submaps] is greater than one, we read channel multiplex settings. For each [j] of [audio_channels] channels:
A.
vector [vorbis_mapping_mux] element [j] = read 4 bits as unsigned integer
B.
if the value is greater than the highest numbered submap ([vorbis_mapping_submaps] - 1), this in an error condition rendering the stream undecodable
v.
for each submap [j] of [vorbis_mapping_submaps] submaps, read the floor and residue numbers for use in decoding that submap:
A.
read and discard 8 bits (the unused time configuration placeholder)
B.
read 8 bits as unsigned integer for the floor number; save in vector [vorbis_mapping_submap_floor] element [j]
C.
verify the floor number is not greater than the highest number floor configured for the bitstream. If it is, the bitstream is undecodable
D.
read 8 bits as unsigned integer for the residue number; save in vector [vorbis_mapping_submap_residue] element [j]
E.
verify the residue number is not greater than the highest number residue configured for the bitstream. If it is, the bitstream is undecodable
vi.
save this mapping configuration in slot [i] of the mapping configuration array [vorbis_mapping_configurations].

Modes

1.
[vorbis_mode_count] = read 6 bits as unsigned integer and add one
2.
For each of [vorbis_mode_count] mode numbers:
a)
[vorbis_mode_blockflag] = read 1 bit
b)
[vorbis_mode_windowtype] = read 16 bits as unsigned integer
c)
[vorbis_mode_transformtype] = read 16 bits as unsigned integer
d)
[vorbis_mode_mapping] = read 8 bits as unsigned integer
e)
verify ranges; zero is the only legal value in Vorbis I for [vorbis_mode_windowtype] and [vorbis_mode_transformtype]. [vorbis_mode_mapping] must not be greater than the highest number mapping in use. Any illegal values render the stream undecodable.
f)
save this mode configuration in slot [i] of the mode configuration array [vorbis_mode_configurations].
3.
read 1 bit as a framing flag. If unset, a framing error occurred and the stream is not decodable.

After reading mode descriptions, setup header decode is complete.

 

4.3. Audio packet decode and synthesis

Following the three header packets, all packets in a Vorbis I stream are audio. The first step of audio packet decode is to read and verify the packet type. A non-audio packet when audio isexpected indicates stream corruption or a non-compliant stream. The decoder must ignore thepacket and not attempt decoding it to audio.

 

4.3.1. packet type, mode and window decode

 

1.
read 1 bit [packet_type]; check that packet type is 0 (audio)
2.
read ilog([vorbis_mode_count]-1) bits [mode_number]
3.
decode blocksize [n] is equal to [blocksize_0] if [vorbis_mode_blockflag] is 0, else [n] is equal to [blocksize_1].
4.
perform window selection and setup; this window is used later by the inverse MDCT:
a)
if this is a long window (the [vorbis_mode_blockflag] flag of this mode is set):
i.
read 1 bit for [previous_window_flag]
ii.
read 1 bit for [next_window_flag]
iii.
if [previous_window_flag] is not set, the left half of the window will be a hybrid window for lapping with a short block. See paragraph 1.3.2, “Window shape decode (long windows only)” for an illustration of overlapping dissimilar windows. Else, the left half window will have normal long shape.
iv.
if [next_window_flag] is not set, the right half of the window will be a hybrid window for lapping with a short block. See paragraph 1.3.2, “Window shape decode (long windows only)” for an illustration of overlapping dissimilar windows. Else, the left right window will have normal long shape.
b)
if this is a short window, the window is always the same short-window shape.

Vorbis windows all use the slope function y = sin(π2 sin 2((x + 0.5)∕n π)), where n is window size and x ranges 0n1, but dissimilar lapping requirements can affect overall shape. Window generation proceeds as follows:

 

1.
[window_center] = [n] / 2
2.
if ([vorbis_mode_blockflag] is set and [previous_window_flag] is not set) then
a)
[left_window_start] = [n]/4 - [blocksize_0]/4
b)
[left_window_end] = [n]/4 + [blocksize_0]/4
c)
[left_n] = [blocksize_0]/2

else

a)
[left_window_start] = 0
b)
[left_window_end] = [window_center]
c)
[left_n] = [n]/2
3.
if ([vorbis_mode_blockflag] is set and [next_window_flag] is not set) then
a)
[right_window_start] = [n]*3/4 - [blocksize_0]/4
b)
[right_window_end] = [n]*3/4 + [blocksize_0]/4
c)
[right_n] = [blocksize_0]/2

else

a)
[right_window_start] = [window_center]
b)
[right_window_end] = [n]
c)
[right_n] = [n]/2
4.
window from range 0 ... [left_window_start]-1 inclusive is zero
5.
for [i] in range [left_window_start] ... [left_window_end]-1, window([i]) = sin(π
2 sin 2( ([i]-[left_window_start]+0.5) / [left_n] π
2) )
6.
window from range [left_window_end] ... [right_window_start]-1 inclusive is one
7.
for [i] in range [right_window_start] ... [right_window_end]-1, window([i]) = sin(π
2 sin 2( ([i]-[right_window_start]+0.5) / [right_n] π
2 + π
2) )
8.
window from range [right_window_start] ... [n]-1 is zero

An end-of-packet condition up to this point should be considered an error that discards this packet from the stream. An end of packet condition past this point is to be considered a possible nominal occurrence.

 

4.3.2. floor curve decode

From this point on, we assume out decode context is using mode number [mode_number]from configuration array [vorbis_mode_configurations] and the map number[vorbis_mode_mapping] (specified by the current mode) taken from the mapping configuration array [vorbis_mapping_configurations].

Floor curves are decoded one-by-one in channel order.

For each floor [i] of [audio_channels]

1.
[submap_number] = element [i] of vector [vorbis_mapping_mux]
2.
[floor_number] = element [submap_number] of vector [vorbis_submap_floor]
3.
if the floor type of this floor (vector [vorbis_floor_types] element [floor_number]) is zero then decode the floor for channel [i] according to the subsubsection 6.2.2, “packet decode
4.
if the type of this floor is one then decode the floor for channel [i] according to the subsubsection 7.2.3, “packet decode
5.
save the needed decoded floor information for channel for later synthesis
6.
if the decoded floor returned ’unused’, set vector [no_residue] element [i] to true, else set vector [no_residue] element [i] to false

An end-of-packet condition during floor decode shall result in packet decode zeroing all channel output vectors and skipping to the add/overlap output stage.

 

4.3.3. nonzero vector propagate

A possible result of floor decode is that a specific vector is marked ’unused’ which indicates that that final output vector is all-zero values (and the floor is zero). The residue for that vector is not coded in the stream, save for one complication. If some vectors are used and some are not, channel coupling could result in mixing a zeroed and nonzeroed vector to produce two nonzeroed vectors.

for each [i] from 0 ... [vorbis_mapping_coupling_steps]-1

 

1.
if either [no_residue] entry for channel ([vorbis_mapping_magnitude] element [i]) or channel ([vorbis_mapping_angle] element [i]) are set to false, then both must be set to false. Note that an ’unused’ floor has no decoded floor information; it is important that this is remembered at floor curve synthesis time.

 

4.3.4. residue decode

Unlike floors, which are decoded in channel order, the residue vectors are decoded in submap order.

for each submap [i] in order from 0 ... [vorbis_mapping_submaps]-1

 

1.
[ch] = 0
2.
for each channel [j] in order from 0 ... [audio_channels] - 1
a)
if channel [j] in submap [i] (vector [vorbis_mapping_mux] element [j] is equal to [i])
i.
if vector [no_residue] element [j] is true
A.
vector [do_not_decode_flag] element [ch] is set

else

A.
vector [do_not_decode_flag] element [ch] is unset
ii.
increment [ch]
3.
[residue_number] = vector [vorbis_mapping_submap_residue] element [i]
4.
[residue_type] = vector [vorbis_residue_types] element [residue_number]
5.
decode [ch] vectors using residue [residue_number], according to type [residue_type], also passing vector [do_not_decode_flag] to indicate which vectors in the bundle should not be decoded. Correct per-vector decode length is [n]/2.
6.
[ch] = 0
7.
for each channel [j] in order from 0 ... [audio_channels]
a)
if channel [j] is in submap [i] (vector [vorbis_mapping_mux] element [j] is equal to [i])
i.
residue vector for channel [j] is set to decoded residue vector [ch]
ii.
increment [ch]

 

4.3.5. inverse coupling

for each [i] from [vorbis_mapping_coupling_steps]-1 descending to 0

 

1.
[magnitude_vector] = the residue vector for channel (vector [vorbis_mapping_magnitude] element [i])
2.
[angle_vector] = the residue vector for channel (vector [vorbis_mapping_angle] element [i])
3.
for each scalar value [M] in vector [magnitude_vector] and the corresponding scalar value [A] in vector [angle_vector]:
a)
if ([M] is greater than zero)
i.
if ([A] is greater than zero)
A.
[new_M] = [M]
B.
[new_A] = [M]-[A]

else

A.
[new_A] = [M]
B.
[new_M] = [M]+[A]

else

i.
if ([A] is greater than zero)
A.
[new_M] = [M]
B.
[new_A] = [M]+[A]

else

A.
[new_A] = [M]
B.
[new_M] = [M]-[A]
b)
set scalar value [M] in vector [magnitude_vector] to [new_M]
c)
set scalar value [A] in vector [angle_vector] to [new_A]

 

4.3.6. dot product

For each channel, synthesize the floor curve from the decoded floor information, according to packet type. Note that the vector synthesis length for floor computation is [n]/2.

For each channel, multiply each element of the floor curve by each element of that channel’s residue vector. The result is the dot product of the floor and residue vectors for each channel; the produced vectors are the length [n]/2 audio spectrum for each channel.

One point is worth mentioning about this dot product; a common mistake in a fixed point implementation might be to assume that a 32 bit fixed-point representation for floor and residue and direct multiplication of the vectors is sufficient for acceptable spectral depth in all cases because it happens to mostly work with the current Xiph.Org reference encoder.

However, floor vector values can span 140dB (24 bits unsigned), and the audio spectrum vector should represent a minimum of 120dB (21 bits with sign), even when output is to a 16 bit PCM device. For the residue vector to represent full scale if the floor is nailed to 140dB, it must be able to span 0 to +140dB. For the residue vector to reach full scale if the floor is nailed at 0dB, it must be able to represent 140dB to +0dB. Thus, in order to handle full range dynamics, a residue vector may span 140dB to +140dB entirely within spec. A 280dB range is approximately 48 bits with sign; thus the residue vector must be able to represent a 48 bit range and the dot product must be able to handle an effective 48 bit times 24 bit multiplication. This range may be achieved using large (64 bit or larger) integers, or implementing a movable binary point representation.

 

4.3.7. inverse MDCT

Convert the audio spectrum vector of each channel back into time domain PCM audio via an inverse Modified Discrete Cosine Transform (MDCT). A detailed description of the MDCT is available in [1]. The window function used for the MDCT is the function described earlier.

 

4.3.8. overlap_add

Windowed MDCT output is overlapped and added with the right hand data of the previous window such that the 3/4 point of the previous window is aligned with the 1/4 point of the current window (as illustrated in paragraph 1.3.2, “Window shape decode (long windows only)”). The overlapped portion produced from overlapping the previous and current frame data is finished data to be returned by the decoder. This data spans from the center of the previous window to the center of the current window. In the case of same-sized windows, the amount of data to return is one-half block consisting of and only of the overlapped portions. When overlapping a short and long window, much of the returned range does not actually overlap. This does not damage transform orthogonality. Pay attention however to returning the correct data range; the amount of data to be returned is:

 

1 window\_blocksize(previous\_window)/4+window\_blocksize(current\_window)/4

from the center (element windowsize/2) of the previous window to the center (element windowsize/2-1, inclusive) of the current window.

Data is not returned from the first frame; it must be used to ’prime’ the decode engine. The encoder accounts for this priming when calculating PCM offsets; after the first frame, the proper PCM output offset is ’0’ (as no data has been returned yet).

 

4.3.9. output channel order

Vorbis I specifies only a channel mapping type 0. In mapping type 0, channel mapping is implicitly defined as follows for standard audio applications. As of revision 16781 (20100113), the specification adds defined channel locations for 6.1 and 7.1 surround. Ordering/location for greater-than-eight channels remains ’left to the implementation’.

These channel orderings refer to order within the encoded stream. It is naturally possible for a decoder to produce output with channels in any order. Any such decoder should explicitly document channel reordering behavior.

 

one channel
the stream is monophonic
two channels
the stream is stereo. channel order: left, right
three channels
the stream is a 1d-surround encoding. channel order: left, center, right
four channels
the stream is quadraphonic surround. channel order: front left, front right, rear left, rear right
five channels
the stream is five-channel surround. channel order: front left, center, front right, rear left, rear right
six channels
the stream is 5.1 surround. channel order: front left, center, front right, rear left, rear right, LFE
seven channels
the stream is 6.1 surround. channel order: front left, center, front right, side left, side right, rear center, LFE
eight channels
the stream is 7.1 surround. channel order: front left, center, front right, side left, side right, rear left, rear right, LFE
greater than eight channels
channel use and order is defined by the application

Applications using Vorbis for dedicated purposes may define channel mapping as seen fit. Future channel mappings (such as three and four channel Ambisonics) will make use of channel mappings other than mapping 0.

5. comment field and header specification

 

5.1. Overview

The Vorbis text comment header is the second (of three) header packets that begin a Vorbis bitstream. It is meant for short text comments, not arbitrary metadata; arbitrary metadata belongs in a separate logical bitstream (usually an XML stream type) that provides greater structure and machine parseability.

The comment field is meant to be used much like someone jotting a quick note on the bottom of a CDR. It should be a little information to remember the disc by and explain it to others; a short, to-the-point text note that need not only be a couple words, but isn’t going to be more than a short paragraph. The essentials, in other words, whatever they turn out to be, eg:

 

Honest Bob and the Factory-to-Dealer-Incentives, “I’m Still Around”, opening for Moxy Fr�vous, 1997.

 

5.2. Comment encoding

 

5.2.1. Structure

The comment header is logically a list of eight-bit-clean vectors; the number of vectors is bounded to 232 1 and the length of each vector is limited to 232 1 bytes. The vector length is encoded; the vector contents themselves are not null terminated. In addition to the vector list, there is a single vector for vendor name (also 8 bit clean, length encoded in 32 bits). For example, the 1.0 release of libvorbis set the vendor string to “Xiph.Org libVorbis I 20020717”.

The vector lengths and number of vectors are stored lsb first, according to the bit packing conventions of the vorbis codec. However, since data in the comment header is octet-aligned, they can simply be read as unaligned 32 bit little endian unsigned integers.

The comment header is decoded as follows:

 

1 1) [vendor\_length] = read an unsigned integer of 32 bits
2 2) [vendor\_string] = read a UTF-8 vector as [vendor\_length] octets
3 3) [user\_comment\_list\_length] = read an unsigned integer of 32 bits
4 4) iterate [user\_comment\_list\_length] times {
5 5) [length] = read an unsigned integer of 32 bits
6 6) this iteration’s user comment = read a UTF-8 vector as [length] octets
7 }
8 7) [framing\_bit] = read a single bit as boolean
9 8) if ( [framing\_bit] unset or end-of-packet ) then ERROR
10 9) done.

 

5.2.2. Content vector format

The comment vectors are structured similarly to a UNIX environment variable. That is, comment fields consist of a field name and a corresponding value and look like:

 

 

1 comment[0]="ARTIST=me";
2 comment[1]="TITLE=the sound of Vorbis";

The field name is case-insensitive and may consist of ASCII 0x20 through 0x7D, 0x3D (’=’)excluded. ASCII 0x41 through 0x5A inclusive (characters A-Z) is to be considered equivalent to ASCII 0x61 through 0x7A inclusive (characters a-z).

The field name is immediately followed by ASCII 0x3D (’=’); this equals sign is used to terminate the field name.

0x3D is followed by 8 bit clean UTF-8 encoded value of the field contents to the end of the field.

Field namesBelow is a proposed, minimal list of standard field names with a description of intended use. No single or group of field names is mandatory; a comment header may contain one, all or none of the names in this list.

 

TITLE
Track/Work name
VERSION
The version field may be used to differentiate multiple versions of the same track title in a single collection. (e.g. remix info)
ALBUM
The collection name to which this track belongs
TRACKNUMBER
The track number of this piece if part of a specific larger collection or album
ARTIST
The artist generally considered responsible for the work. In popular music this is usually the performing band or singer. For classical music it would be the composer. For an audio book it would be the author of the original text.
PERFORMER
The artist(s) who performed the work. In classical music this would be the conductor, orchestra, soloists. In an audio book it would be the actor who did the reading. In popular music this is typically the same as the ARTIST and is omitted.
COPYRIGHT
Copyright attribution, e.g., ’2001 Nobody’s Band’ or ’1999 Jack Moffitt’
LICENSE
License information, eg, ’All Rights Reserved’, ’Any Use Permitted’, a URL to a license such as a Creative Commons license (”www.creativecommons.org/blahblah/license.html”) or the EFF Open Audio License (’distributed under the terms of the Open Audio License. see http://www.eff.org/IP/Open_licenses/eff_oal.html for details’), etc.
ORGANIZATION
Name of the organization producing the track (i.e. the ’record label’)
DESCRIPTION
A short text description of the contents
GENRE
A short text indication of music genre
DATE
Date the track was recorded
LOCATION
Location where track was recorded
CONTACT
Contact information for the creators or distributors of the track. This could be a URL, an email address, the physical address of the producing label.
ISRC
International Standard Recording Code for the track; see the ISRC intro page for more information on ISRC numbers.

ImplicationsField names should not be ’internationalized’; this is a concession to simplicity not an attempt to exclude the majority of the world that doesn’t speak English. Fieldcontents, however, use the UTF-8 character encoding to allow easy representation of any language.

We have the length of the entirety of the field and restrictions on the field name so that the field name is bounded in a known way. Thus we also have the length of the field contents.

Individual ’vendors’ may use non-standard field names within reason. The proper use of comment fields should be clear through context at this point. Abuse will be discouraged.

There is no vendor-specific prefix to ’nonstandard’ field names. Vendors should make some effort to avoid arbitrarily polluting the common namespace. We will generally collect the more useful tags here to help with standardization.

Field names are not required to be unique (occur once) within a comment header. As an example, assume a track was recorded by three well know artists; the following is permissible, and encouraged:

 

 

1 ARTIST=Dizzy Gillespie
2 ARTIST=Sonny Rollins
3 ARTIST=Sonny Stitt

 

5.2.3. Encoding

The comment header comprises the entirety of the second bitstream header packet. Unlike the first bitstream header packet, it is not generally the only packet on the second page and may not be restricted to within the second bitstream page. The length of the comment header packet is (practically) unbounded. The comment header packet is not optional; it must be present in the bitstream even if it is effectively empty.

The comment header is encoded as follows (as per Ogg’s standard bitstream mapping which renders least-significant-bit of the word to be coded into the least significant available bit of the current bitstream octet first):

 

1.
Vendor string length (32 bit unsigned quantity specifying number of octets)
2.
Vendor string ([vendor string length] octets coded from beginning of string to end of string, not null terminated)
3.
Number of comment fields (32 bit unsigned quantity specifying number of fields)
4.
Comment field 0 length (if [Number of comment fields] > 0; 32 bit unsigned quantity specifying number of octets)
5.
Comment field 0 ([Comment field 0 length] octets coded from beginning of string to end of string, not null terminated)
6.
Comment field 1 length (if [Number of comment fields] > 1...)...

This is actually somewhat easier to describe in code; implementation of the above can be found in vorbis/lib/info.c, _vorbis_pack_comment() and _vorbis_unpack_comment().

6. Floor type 0 setup and decode

 

6.1. Overview

Vorbis floor type zero uses Line Spectral Pair (LSP, also alternately known as Line Spectral Frequency or LSF) representation to encode a smooth spectral envelope curve as the frequency response of the LSP filter. This representation is equivalent to a traditional all-pole infinite impulse response filter as would be used in linear predictive coding; LSP representation may be converted to LPC representation and vice-versa.

 

6.2. Floor 0 format

Floor zero configuration consists of six integer fields and a list of VQ codebooks for use in coding/decoding the LSP filter coefficient values used by each frame.

 

6.2.1. header decode

Configuration information for instances of floor zero decodes from the codec setup header (third packet). configuration decode proceeds as follows:

 

1 1) [floor0_order] = read an unsigned integer of 8 bits
2 2) [floor0_rate] = read an unsigned integer of 16 bits
3 3) [floor0_bark_map_size] = read an unsigned integer of 16 bits
4 4) [floor0_amplitude_bits] = read an unsigned integer of six bits
5 5) [floor0_amplitude_offset] = read an unsigned integer of eight bits
6 6) [floor0_number_of_books] = read an unsigned integer of four bits and add 1
7 7) array [floor0_book_list] = read a list of [floor0_number_of_books] unsigned integers of eight bits each;

An end-of-packet condition during any of these bitstream reads renders this stream undecodable. In addition, any element of the array [floor0_book_list] that is greater than the maximum codebook number for this bitstream is an error condition that also renders the stream undecodable.

 

6.2.2. packet decode

Extracting a floor0 curve from an audio packet consists of first decoding the curve amplitude and [floor0_order] LSP coefficient values from the bitstream, and then computing the floor curve, which is defined as the frequency response of the decoded LSP filter.

Packet decode proceeds as follows:

1 1) [amplitude] = read an unsigned integer of [floor0_amplitude_bits] bits
2 2) if ( [amplitude] is greater than zero ) {
3 3) [coefficients] is an empty, zero length vector
4 4) [booknumber] = read an unsigned integer of ilog( [floor0_number_of_books] ) bits
5 5) if ( [booknumber] is greater than the highest number decode codebook ) then packet is undecodable
6 6) [last] = zero;
7 7) vector [temp_vector] = read vector from bitstream using codebook number [floor0_book_list] element [booknumber] in VQ context.
8 8) add the scalar value [last] to each scalar in vector [temp_vector]
9 9) [last] = the value of the last scalar in vector [temp_vector]
10 10) concatenate [temp_vector] onto the end of the [coefficients] vector
11 11) if (length of vector [coefficients] is less than [floor0_order], continue at step 6
12
13 }
14
15 12) done.
16

Take note of the following properties of decode:

  • An [amplitude] value of zero must result in a return code that indicates this channel is unused in this frame (the output of the channel will be all-zeroes in synthesis). Several later stages of decode don’t occur for an unused channel.
  • An end-of-packet condition during decode should be considered a nominal occruence; if end-of-packet is reached during any read operation above, floor decode is to return ’unused’ status as if the [amplitude] value had read zero at the beginning of decode.
  • The book number used for decode can, in fact, be stored in the bitstream in ilog( [floor0_number_of_books] - 1 ) bits. Nevertheless, the above specification is correct and values greater than the maximum possible book value are reserved.
  • The number of scalars read into the vector [coefficients] may be greater than [floor0_order], the number actually required for curve computation. For example, if the VQ codebook used for the floor currently being decoded has a [codebook_dimensions] value of three and [floor0_order] is ten, the only way to fill all the needed scalars in [coefficients] is to to read a total of twelve scalars as four vectors of three scalars each. This is not an error condition, and care must be taken not to allow a buffer overflow in decode. The extra values are not used and may be ignored or discarded.

 

6.2.3. curve computation

Given an [amplitude] integer and [coefficients] vector from packet decode as well as the [floor0_order], [floor0_rate], [floor0_bark_map_size], [floor0_amplitude_bits] and [floor0_amplitude_offset] values from floor setup, and an output vector size [n] specified by the decode process, we compute a floor output vector.

If the value [amplitude] is zero, the return value is a length [n] vector with all-zero scalars. Otherwise, begin by assuming the following definitions for the given vector to be synthesized:

        {
          min (floor0_bark_map_size    − 1,foobar )  for i ∈ [0,n − 1 ]
mapi =    − 1                                        for i = n

where

          ⌊                                                 ⌋
                (floor0_rate   ⋅ i) floor0_bark_map_size
foobar =   bark  -------2n-------  ⋅-bark(.5 ⋅ floor0_rate-)

and

                                                         2
bark(x) = 13.1arctan (.00074x ) + 2.24 arctan(.0000000185x  +  .0001x )

The above is used to synthesize the LSP curve on a Bark-scale frequency axis, then map the result to a linear-scale frequency axis. Similarly, the below calculation synthesizes the output LSP curve [output] on a log (dB) amplitude scale, mapping it to linear amplitude in the last step:

 

1.
[i] = 0
2.
[ω] = π * map element [i] / [floor0_bark_map_size]
3.
if ( [floor0_order] is odd )
a)
calculate [p] and [q] according to:
                   floor0_order−3
               2      ∏2                                       2
p  =   (1 − cos ω)           4(cos([coefficients  ]2j+1) − cosω )
         floor0_order−1   j=0
       1 ----∏2----
q  =   --          4(cos([coefficients  ]2j) − cosω )2
       4    j=0

else [floor0_order] is even

b)
calculate [p] and [q] according to:
                   floor0_order−2
       (1-−-cosω-)    ∏2                                       2
p  =        2                4(cos([coefficients   ]2j+1) − cosω)
                      j=0
                   floor0_∏o2rder−-2
q  =   (1-+-cosω-)           4(cos([coefficients  ]2j) − cos ω)2
            2         j=0
4.
calculate [linear_floor_value] according to:
    (           (                                                                      ))
exp   .11512925   amplitude---⋅ floor0_amplitute_√offset---−  floor0_amplitude_offset
                     (2floor0_amplitude_bits − 1)  p + q

 

5.
[iteration_condition] = map element [i]
6.
[output] element [i] = [linear_floor_value]
7.
increment [i]
8.
if ( map element [i] is equal to [iteration_condition] ) continue at step 5
9.
if ( [i] is less than [n] ) continue at step 2
10.
done

7. Floor type 1 setup and decode

 

7.1. Overview

Vorbis floor type one uses a piecewise straight-line representation to encode a spectral envelope curve. The representation plots this curve mechanically on a linear frequency axis and a logarithmic (dB) amplitude axis. The integer plotting algorithm used is similar to Bresenham’s algorithm.

 

7.2. Floor 1 format

 

7.2.1. model

Floor type one represents a spectral curve as a series of line segments. Synthesis constructs a floor curve using iterative prediction in a process roughly equivalent to the following simplified description:

  • the first line segment (base case) is a logical line spanning from x˙0,y˙0 to x˙1,y˙1 where in the base case x˙0=0 and x˙1=[n], the full range of the spectral floor to be computed.
  • the induction step chooses a point x˙new within an existing logical line segment and produces a y˙new value at that point computed from the existing line’s y value at x˙new (as plotted by the line) and a difference value decoded from the bitstream packet.
  • floor computation produces two new line segments, one running from x˙0,y˙0 to x˙new,y˙new and from x˙new,y˙new to x˙1,y˙1. This step is performed logically even if y˙new represents no change to the amplitude value at x˙new so that later refinement is additionally bounded at x˙new.
  • the induction step repeats, using a list of x values specified in the codec setup header at floor 1 initialization time. Computation is completed at the end of the x value list.

Consider the following example, with values chosen for ease of understanding rather than representing typical configuration:

For the below example, we assume a floor setup with an [n] of 128. The list of selected X values in increasing order is 0,16,32,48,64,80,96,112 and 128. In list order, the values interleave as 0, 128, 64, 32, 96, 16, 48, 80 and 112. The corresponding list-order Y values as decoded from an example packet are 110, 20, -5, -45, 0, -25, -10, 30 and -10. We compute the floor in the following way, beginning with the first line:

PIC


Figure 7: graph of example floor

We now draw new logical lines to reflect the correction to new˙Y, and iterate for X positions 32 and 96:

PIC


Figure 8: graph of example floor

Although the new Y value at X position 96 is unchanged, it is still used later as an endpoint for further refinement. From here on, the pattern should be clear; we complete the floor computation as follows:

PIC


Figure 9: graph of example floor

PIC


Figure 10: graph of example floor

A more efficient algorithm with carefully defined integer rounding behavior is used for actual decode, as described later. The actual algorithm splits Y value computation and line plotting into two steps with modifications to the above algorithm to eliminate noise accumulation through integer roundoff/truncation.

 

7.2.2. header decode

A list of floor X values is stored in the packet header in interleaved format (used in list order during packet decode and synthesis). This list is split into partitions, and each partition is assigned to a partition class. X positions 0 and [n] are implicit and do not belong to an explicit partition or partition class.

A partition class consists of a representation vector width (the number of Y values which the partition class encodes at once), a ’subclass’ value representing the number of alternate entropy books the partition class may use in representing Y values, the list of [subclass] books and a master book used to encode which alternate books were chosen for representation in a given packet. The master/subclass mechanism is meant to be used as a flexible representation cascade while still using codebooks only in a scalar context.

 

1
2 1) [floor1_partitions] = read 5 bits as unsigned integer
3 2) [maximum_class] = -1
4 3) iterate [i] over the range 0 ... [floor1_partitions]-1 {
5
6 4) vector [floor1_partition_class_list] element [i] = read 4 bits as unsigned integer
7
8 }
9
10 5) [maximum_class] = largest integer scalar value in vector [floor1_partition_class_list]
11 6) iterate [i] over the range 0 ... [maximum_class] {
12
13 7) vector [floor1_class_dimensions] element [i] = read 3 bits as unsigned integer and add 1
14 8) vector [floor1_class_subclasses] element [i] = read 2 bits as unsigned integer
15 9) if ( vector [floor1_class_subclasses] element [i] is nonzero ) {
16
17 10) vector [floor1_class_masterbooks] element [i] = read 8 bits as unsigned integer
18
19 }
20
21 11) iterate [j] over the range 0 ... (2 exponent [floor1_class_subclasses] element [i]) - 1 {
22
23 12) array [floor1_subclass_books] element [i],[j] =
24 read 8 bits as unsigned integer and subtract one
25 }
26 }
27
28 13) [floor1_multiplier] = read 2 bits as unsigned integer and add one
29 14) [rangebits] = read 4 bits as unsigned integer
30 15) vector [floor1_X_list] element [0] = 0
31 16) vector [floor1_X_list] element [1] = 2 exponent [rangebits];
32 17) [floor1_values] = 2
33 18) iterate [i] over the range 0 ... [floor1_partitions]-1 {
34
35 19) [current_class_number] = vector [floor1_partition_class_list] element [i]
36 20) iterate [j] over the range 0 ... ([floor1_class_dimensions] element [current_class_number])-1 {
37 21) vector [floor1_X_list] element ([floor1_values]) =
38 read [rangebits] bits as unsigned integer
39 22) increment [floor1_values] by one
40 }
41 }
42
43 23) done

An end-of-packet condition while reading any aspect of a floor 1 configuration during setup renders a stream undecodable. In addition, a [floor1_class_masterbooks] or[floor1_subclass_books] scalar element greater than the highest numbered codebook configured in this stream is an error condition that renders the stream undecodable. Vector [floor1_x_list] is limited to a maximum length of 65 elements; a setup indicating more than 65 total elements (including elements 0 and 1 set prior to the read loop) renders the stream undecodable. All vector [floor1_x_list] element values must be unique within the vector; a non-unique value renders the stream undecodable.

 

7.2.3. packet decode

Packet decode begins by checking the [nonzero] flag:

 

1 1) [nonzero] = read 1 bit as boolean

If [nonzero] is unset, that indicates this channel contained no audio energy in this frame. Decode immediately returns a status indicating this floor curve (and thus this channel) is unused this frame. (A return status of ’unused’ is different from decoding a floor that has all points set to minimum representation amplitude, which happens to be approximately-140dB).

Assuming [nonzero] is set, decode proceeds as follows:

 

1 1) [range] = vector { 256, 128, 86, 64 } element ([floor1_multiplier]-1)
2 2) vector [floor1_Y] element [0] = read ilog([range]-1) bits as unsigned integer
3 3) vector [floor1_Y] element [1] = read ilog([range]-1) bits as unsigned integer
4 4) [offset] = 2;
5 5) iterate [i] over the range 0 ... [floor1_partitions]-1 {
6
7 6) [class] = vector [floor1_partition_class] element [i]
8 7) [cdim] = vector [floor1_class_dimensions] element [class]
9 8) [cbits] = vector [floor1_class_subclasses] element [class]
10 9) [csub] = (2 exponent [cbits])-1
11 10) [cval] = 0
12 11) if ( [cbits] is greater than zero ) {
13
14 12) [cval] = read from packet using codebook number
15 (vector [floor1_class_masterbooks] element [class]) in scalar context
16 }
17
18 13) iterate [j] over the range 0 ... [cdim]-1 {
19
20 14) [book] = array [floor1_subclass_books] element [class],([cval] bitwise AND [csub])
21 15) [cval] = [cval] right shifted [cbits] bits
22 16) if ( [book] is not less than zero ) {
23
24 17) vector [floor1_Y] element ([j]+[offset]) = read from packet using codebook
25 [book] in scalar context
26
27 } else [book] is less than zero {
28
29 18) vector [floor1_Y] element ([j]+[offset]) = 0
30
31 }
32 }
33
34 19) [offset] = [offset] + [cdim]
35
36 }
37
38 20) done

An end-of-packet condition during curve decode should be considered a nominal occurrence; if end-of-packet is reached during any read operation above, floor decode is to return ’unused’status as if the [nonzero] flag had been unset at the beginning of decode.

Vector [floor1_Y] contains the values from packet decode needed for floor 1 synthesis.

 

7.2.4. curve computation

Curve computation is split into two logical steps; the first step derives final Y amplitude values from the encoded, wrapped difference values taken from the bitstream. The second step plots the curve lines. Also, although zero-difference values are used in the iterative prediction to find final Y values, these points are conditionally skipped during final line computation in step two. Skipping zero-difference values allows a smoother line fit.

Although some aspects of the below algorithm look like inconsequential optimizations, implementors are warned to follow the details closely. Deviation from implementing a strictly equivalent algorithm can result in serious decoding errors.

Additional note: Although [floor1_final_Y] values in the prediction loop and at the end of step 1 are inherently limited by the prediction algorithm to [0, [range]), it is possible to abuse the setup and codebook machinery to produce negative or over-range results. We suggest that decoder implementations guard the values in vector [floor1_final_Y] by clamping each element to [0, [range]) after step 1. Variants of this suggestion are acceptable as valid floor1 setups cannot produce out of range values.

 

step 1: amplitude value synthesis

Unwrap the always-positive-or-zero values read from the packet into +/- difference values, then apply to line prediction.

 

1 1) [range] = vector { 256, 128, 86, 64 } element ([floor1_multiplier]-1)
2 2) vector [floor1_step2_flag] element [0] = set
3 3) vector [floor1_step2_flag] element [1] = set
4 4) vector [floor1_final_Y] element [0] = vector [floor1_Y] element [0]
5 5) vector [floor1_final_Y] element [1] = vector [floor1_Y] element [1]
6 6) iterate [i] over the range 2 ... [floor1_values]-1 {
7
8 7) [low_neighbor_offset] = low_neighbor([floor1_X_list],[i])
9 8) [high_neighbor_offset] = high_neighbor([floor1_X_list],[i])
10
11 9) [predicted] = render_point( vector [floor1_X_list] element [low_neighbor_offset],
12 vector [floor1_final_Y] element [low_neighbor_offset],
13 vector [floor1_X_list] element [high_neighbor_offset],
14 vector [floor1_final_Y] element [high_neighbor_offset],
15 vector [floor1_X_list] element [i] )
16
17 10) [val] = vector [floor1_Y] element [i]
18 11) [highroom] = [range] - [predicted]
19 12) [lowroom] = [predicted]
20 13) if ( [highroom] is less than [lowroom] ) {
21
22 14) [room] = [highroom] * 2
23
24 } else [highroom] is not less than [lowroom] {
25
26 15) [room] = [lowroom] * 2
27
28 }
29
30 16) if ( [val] is nonzero ) {
31
32 17) vector [floor1_step2_flag] element [low_neighbor_offset] = set
33 18) vector [floor1_step2_flag] element [high_neighbor_offset] = set
34 19) vector [floor1_step2_flag] element [i] = set
35 20) if ( [val] is greater than or equal to [room] ) {
36
37 21) if ( [highroom] is greater than [lowroom] ) {
38
39 22) vector [floor1_final_Y] element [i] = [val] - [lowroom] + [predicted]
40
41 } else [highroom] is not greater than [lowroom] {
42
43 23) vector [floor1_final_Y] element [i] = [predicted] - [val] + [highroom] - 1
44
45 }
46
47 } else [val] is less than [room] {
48
49 24) if ([val] is odd) {
50
51 25) vector [floor1_final_Y] element [i] =
52 [predicted] - (([val] + 1) divided by 2 using integer division)
53
54 } else [val] is even {
55
56 26) vector [floor1_final_Y] element [i] =
57 [predicted] + ([val] / 2 using integer division)
58
59 }
60
61 }
62
63 } else [val] is zero {
64
65 27) vector [floor1_step2_flag] element [i] = unset
66 28) vector [floor1_final_Y] element [i] = [predicted]
67
68 }
69
70 }
71
72 29) done
73
step 2: curve synthesis

Curve synthesis generates a return vector [floor] of length [n] (where [n] is provided by the decode process calling to floor decode). Floor 1 curve synthesis makes use of the [floor1_X_list], [floor1_final_Y] and [floor1_step2_flag] vectors, as well as [floor1_multiplier] and [floor1_values] values.

Decode begins by sorting the scalars from vectors [floor1_X_list], [floor1_final_Y] and [floor1_step2_flag] together into new vectors [floor1_X_list]’, [floor1_final_Y]’and [floor1_step2_flag]’ according to ascending sort order of the values in [floor1_X_list]. That is, sort the values of [floor1_X_list] and then apply the same permutation to elements of the other two vectors so that the X, Y and step2_flag values still match.

Then compute the final curve in one pass:

 

1 1) [hx] = 0
2 2) [lx] = 0
3 3) [ly] = vector [floor1_final_Y]’ element [0] * [floor1_multiplier]
4 4) iterate [i] over the range 1 ... [floor1_values]-1 {
5
6 5) if ( [floor1_step2_flag]’ element [i] is set ) {
7
8 6) [hy] = [floor1_final_Y]’ element [i] * [floor1_multiplier]
9 7) [hx] = [floor1_X_list]’ element [i]
10 8) render_line( [lx], [ly], [hx], [hy], [floor] )
11 9) [lx] = [hx]
12 10) [ly] = [hy]
13 }
14 }
15
16 11) if ( [hx] is less than [n] ) {
17
18 12) render_line( [hx], [hy], [n], [hy], [floor] )
19
20 }
21
22 13) if ( [hx] is greater than [n] ) {
23
24 14) truncate vector [floor] to [n] elements
25
26 }
27
28 15) for each scalar in vector [floor], perform a lookup substitution using
29 the scalar value from [floor] as an offset into the vector [floor1_inverse_dB_static_table]
30
31 16) done
32

8. Residue setup and decode

 

8.1. Overview

A residue vector represents the fine detail of the audio spectrum of one channel in an audio frame after the encoder subtracts the floor curve and performs any channel coupling. A residue vector may represent spectral lines, spectral magnitude, spectral phase or hybrids as mixed by channel coupling. The exact semantic content of the vector does not matter to the residue abstraction.

Whatever the exact qualities, the Vorbis residue abstraction codes the residue vectors into the bitstream packet, and then reconstructs the vectors during decode. Vorbis makes use of three different encoding variants (numbered 0, 1 and 2) of the same basic vector encoding abstraction.

 

8.2. Residue format

Residue format partitions each vector in the vector bundle into chunks, classifies each chunk, encodes the chunk classifications and finally encodes the chunks themselves using the the specific VQ arrangement defined for each selected classification. The exact interleaving and partitioning vary by residue encoding number, however the high-level process used to classify and encode the residue vector is the same in all three variants.

A set of coded residue vectors are all of the same length. High level coding structure, ignoring for the moment exactly how a partition is encoded and simply trusting that it is, is as follows:

  • Each vector is partitioned into multiple equal sized chunks according to configuration specified. If we have a vector size of n, a partition size residue_partition_size, and a total of ch residue vectors, the total number of partitioned chunks coded is n/residue_partition_size*ch. It is important to note that the integer division truncates. In the below example, we assume an example residue_partition_size of 8.
  • Each partition in each vector has a classification number that specifies which of multiple configured VQ codebook setups are used to decode that partition. The classification numbers of each partition can be thought of as forming a vector in their own right, as in the illustration below. Just as the residue vectors are coded in grouped partitions to increase encoding efficiency, the classification vector is also partitioned into chunks. The integer elements of each scalar in a classification chunk are built into a single scalar that represents the classification numbers in that chunk. In the below example, the classification codeword encodes two classification numbers.
  • The values in a residue vector may be encoded monolithically in a single pass through the residue vector, but more often efficient codebook design dictates that each vector is encoded as the additive sum of several passes through the residue vector using more than one VQ codebook. Thus, each residue value potentially accumulates values from multiple decode passes. The classification value associated with a partition is the same in each pass, thus the classification codeword is coded only in the first pass.

PIC


Figure 11: illustration of residue vector format

 

8.3. residue 0

Residue 0 and 1 differ only in the way the values within a residue partition are interleaved during partition encoding (visually treated as a black box–or cyan box or brown box–in the above figure).

Residue encoding 0 interleaves VQ encoding according to the dimension of the codebook used to encode a partition in a specific pass. The dimension of the codebook need not be the same in multiple passes, however the partition size must be an even multiple of the codebook dimension.

As an example, assume a partition vector of size eight, to be encoded by residue 0 using codebook sizes of 8, 4, 2 and 1:

 

1
2 original residue vector: [ 0 1 2 3 4 5 6 7 ]
3
4 codebook dimensions = 8 encoded as: [ 0 1 2 3 4 5 6 7 ]
5
6 codebook dimensions = 4 encoded as: [ 0 2 4 6 ], [ 1 3 5 7 ]
7
8 codebook dimensions = 2 encoded as: [ 0 4 ], [ 1 5 ], [ 2 6 ], [ 3 7 ]
9
10 codebook dimensions = 1 encoded as: [ 0 ], [ 1 ], [ 2 ], [ 3 ], [ 4 ], [ 5 ], [ 6 ], [ 7 ]
11

It is worth mentioning at this point that no configurable value in the residue coding setup is restricted to a power of two.

 

8.4. residue 1

Residue 1 does not interleave VQ encoding. It represents partition vector scalars in order. As with residue 0, however, partition length must be an integer multiple of the codebook dimension, although dimension may vary from pass to pass.

As an example, assume a partition vector of size eight, to be encoded by residue 0 using codebook sizes of 8, 4, 2 and 1:

 

1
2 original residue vector: [ 0 1 2 3 4 5 6 7 ]
3
4 codebook dimensions = 8 encoded as: [ 0 1 2 3 4 5 6 7 ]
5
6 codebook dimensions = 4 encoded as: [ 0 1 2 3 ], [ 4 5 6 7 ]
7
8 codebook dimensions = 2 encoded as: [ 0 1 ], [ 2 3 ], [ 4 5 ], [ 6 7 ]
9
10 codebook dimensions = 1 encoded as: [ 0 ], [ 1 ], [ 2 ], [ 3 ], [ 4 ], [ 5 ], [ 6 ], [ 7 ]
11

 

8.5. residue 2

Residue type two can be thought of as a variant of residue type 1. Rather than encoding multiple passed-in vectors as in residue type 1, the ch passed in vectors of length n are first interleaved and flattened into a single vector of length ch*n. Encoding then proceeds as in type 1. Decoding is as in type 1 with decode interleave reversed. If operating on a single vector to begin with, residue type 1 and type 2 are equivalent.

PIC


Figure 12: illustration of residue type 2

 

8.6. Residue decode

 

8.6.1. header decode

Header decode for all three residue types is identical.

1 1) [residue\_begin] = read 24 bits as unsigned integer
2 2) [residue\_end] = read 24 bits as unsigned integer
3 3) [residue\_partition\_size] = read 24 bits as unsigned integer and add one
4 4) [residue\_classifications] = read 6 bits as unsigned integer and add one
5 5) [residue\_classbook] = read 8 bits as unsigned integer

[residue_begin] and [residue_end] select the specific sub-portion of each vector that is actually coded; it implements akin to a bandpass where, for coding purposes, the vector effectively begins at element [residue_begin] and ends at [residue_end]. Preceding and following values in the unpacked vectors are zeroed. Note that for residue type 2, these values as well as [residue_partition_size]apply to the interleaved vector, not the individual vectors before interleave. [residue_partition_size] is as explained above,[residue_classifications] is the number of possible classification to which a partition can belong and [residue_classbook] is the codebook number used to code classification codewords. The number of dimensions in book [residue_classbook] determines how many classification values are grouped into a single classification codeword. Note that the number of entries and dimensions in book [residue_classbook], along with[residue_classifications], overdetermines to possible number of classification codewords. If [residue_classifications]ˆ[residue_classbook].dimensions exceeds[residue_classbook].entries, the bitstream should be regarded to be undecodable.

Next we read a bitmap pattern that specifies which partition classes code values in which passes.

 

1 1) iterate [i] over the range 0 ... [residue\_classifications]-1 {
2
3 2) [high\_bits] = 0
4 3) [low\_bits] = read 3 bits as unsigned integer
5 4) [bitflag] = read one bit as boolean
6 5) if ( [bitflag] is set ) then [high\_bits] = read five bits as unsigned integer
7 6) vector [residue\_cascade] element [i] = [high\_bits] * 8 + [low\_bits]
8 }
9 7) done

Finally, we read in a list of book numbers, each corresponding to specific bit set in the cascade bitmap. We loop over the possible codebook classifications and the maximum possible number of encoding stages (8 in Vorbis I, as constrained by the elements of the cascade bitmap being eight bits):

 

1 1) iterate [i] over the range 0 ... [residue\_classifications]-1 {
2
3 2) iterate [j] over the range 0 ... 7 {
4
5 3) if ( vector [residue\_cascade] element [i] bit [j] is set ) {
6
7 4) array [residue\_books] element [i][j] = read 8 bits as unsigned integer
8
9 } else {
10
11 5) array [residue\_books] element [i][j] = unused
12
13 }
14 }
15 }
16
17 6) done

An end-of-packet condition at any point in header decode renders the stream undecodable. In addition, any codebook number greater than the maximum numbered codebook set up in this stream also renders the stream undecodable. All codebooks in array [residue_books] are required to have a value mapping. The presence of codebook in array [residue_books] without a value mapping (maptype equals zero) renders the stream undecodable.

 

8.6.2. packet decode

Format 0 and 1 packet decode is identical except for specific partition interleave. Format 2 packet decode can be built out of the format 1 decode process. Thus we describe first the decode infrastructure identical to all three formats.

In addition to configuration information, the residue decode process is passed the number of vectors in the submap bundle and a vector of flags indicating if any of the vectors are not to be decoded. If the passed in number of vectors is 3 and vector number 1 is marked ’do not decode’,decode skips vector 1 during the decode loop. However, even ’do not decode’ vectors are allocated and zeroed.

Depending on the values of [residue_begin] and [residue_end], it is obvious that the encoded portion of a residue vector may be the entire possible residue vector or some other strict subset of the actual residue vector size with zero padding at either uncoded end. However, it is also possible to set [residue_begin] and [residue_end] to specify a range partially or wholly beyond the maximum vector size. Before beginning residue decode, limit [residue_begin]and [residue_end] to the maximum possible vector size as follows. We assume that the number of vectors being encoded, [ch] is provided by the higher level decoding process.

 

1 1) [actual\_size] = current blocksize/2;
2 2) if residue encoding is format 2
3 3) [actual\_size] = [actual\_size] * [ch];
4 4) [limit\_residue\_begin] = maximum of ([residue\_begin],[actual\_size]);
5 5) [limit\_residue\_end] = maximum of ([residue\_end],[actual\_size]);

The following convenience values are conceptually useful to clarifying the decode process:

 

1 1) [classwords\_per\_codeword] = [codebook\_dimensions] value of codebook [residue\_classbook]
2 2) [n\_to\_read] = [limit\_residue\_end] - [limit\_residue\_begin]
3 3) [partitions\_to\_read] = [n\_to\_read] / [residue\_partition\_size]

Packet decode proceeds as follows, matching the description offered earlier in the document.

1 1) allocate and zero all vectors that will be returned.
2 2) if ([n\_to\_read] is zero), stop; there is no residue to decode.
3 3) iterate [pass] over the range 0 ... 7 {
4
5 4) [partition\_count] = 0
6
7 5) while [partition\_count] is less than [partitions\_to\_read]
8
9 6) if ([pass] is zero) {
10
11 7) iterate [j] over the range 0 .. [ch]-1 {
12
13 8) if vector [j] is not marked ’do not decode’ {
14
15 9) [temp] = read from packet using codebook [residue\_classbook] in scalar context
16 10) iterate [i] descending over the range [classwords\_per\_codeword]-1 ... 0 {
17
18 11) array [classifications] element [j],([i]+[partition\_count]) =
19 [temp] integer modulo [residue\_classifications]
20 12) [temp] = [temp] / [residue\_classifications] using integer division
21
22 }
23
24 }
25
26 }
27
28 }
29
30 13) iterate [i] over the range 0 .. ([classwords\_per\_codeword] - 1) while [partition\_count]
31 is also less than [partitions\_to\_read] {
32
33 14) iterate [j] over the range 0 .. [ch]-1 {
34
35 15) if vector [j] is not marked ’do not decode’ {
36
37 16) [vqclass] = array [classifications] element [j],[partition\_count]
38 17) [vqbook] = array [residue\_books] element [vqclass],[pass]
39 18) if ([vqbook] is not ’unused’) {
40
41 19) decode partition into output vector number [j], starting at scalar
42 offset [limit\_residue\_begin]+[partition\_count]*[residue\_partition\_size] using
43 codebook number [vqbook] in VQ context
44 }
45 }
46
47 20) increment [partition\_count] by one
48
49 }
50 }
51 }
52
53 21) done
54

An end-of-packet condition during packet decode is to be considered a nominal occurrence. Decode returns the result of vector decode up to that point.

 

8.6.3. format 0 specifics

Format zero decodes partitions exactly as described earlier in the ’Residue Format: residue 0’section. The following pseudocode presents the same algorithm. Assume:

  • [n] is the value in [residue_partition_size]
  • [v] is the residue vector
  • [offset] is the beginning read offset in [v]

 

1 1) [step] = [n] / [codebook\_dimensions]
2 2) iterate [i] over the range 0 ... [step]-1 {
3
4 3) vector [entry\_temp] = read vector from packet using current codebook in VQ context
5 4) iterate [j] over the range 0 ... [codebook\_dimensions]-1 {
6
7 5) vector [v] element ([offset]+[i]+[j]*[step]) =
8 vector [v] element ([offset]+[i]+[j]*[step]) +
9 vector [entry\_temp] element [j]
10
11 }
12
13 }
14
15 6) done
16

 

8.6.4. format 1 specifics

Format 1 decodes partitions exactly as described earlier in the ’Residue Format: residue 1’section. The following pseudocode presents the same algorithm. Assume:

  • [n] is the value in [residue_partition_size]
  • [v] is the residue vector
  • [offset] is the beginning read offset in [v]

 

1 1) [i] = 0
2 2) vector [entry\_temp] = read vector from packet using current codebook in VQ context
3 3) iterate [j] over the range 0 ... [codebook\_dimensions]-1 {
4
5 4) vector [v] element ([offset]+[i]) =
6 vector [v] element ([offset]+[i]) +
7 vector [entry\_temp] element [j]
8 5) increment [i]
9
10 }
11
12 6) if ( [i] is less than [n] ) continue at step 2
13 7) done

 

8.6.5. format 2 specifics

Format 2 is reducible to format 1. It may be implemented as an additional step prior to and an additional post-decode step after a normal format 1 decode.

Format 2 handles ’do not decode’ vectors differently than residue 0 or 1; if all vectors are marked’do not decode’, no decode occurrs. However, if at least one vector is to be decoded, all the vectors are decoded. We then request normal format 1 to decode a single vector representing all output channels, rather than a vector for each channel. After decode, deinterleave the vector into independent vectors, one for each output channel. That is:

 

1.
If all vectors 0 through ch-1 are marked ’do not decode’, allocate and clear a single vector [v]of length ch*n and skip step 2 below; proceed directly to the post-decode step.
2.
Rather than performing format 1 decode to produce ch vectors of length n each, call format 1 decode to produce a single vector [v] of length ch*n.
3.
Post decode: Deinterleave the single vector [v] returned by format 1 decode as described above into ch independent vectors, one for each outputchannel, according to:
1 1) iterate [i] over the range 0 ... [n]-1 {
2
3 2) iterate [j] over the range 0 ... [ch]-1 {
4
5 3) output vector number [j] element [i] = vector [v] element ([i] * [ch] + [j])
6
7 }
8 }
9
10 4) done

9. Helper equations

 

9.1. Overview

The equations below are used in multiple places by the Vorbis codec specification. Rather than cluttering up the main specification documents, they are defined here and referenced where appropriate.

 

9.2. Functions

 

9.2.1. ilog

The ”ilog(x)” function returns the position number (1 through n) of the highest set bit in the two’s complement integer value [x]. Values of [x] less than zero are defined to return zero.

 

1 1) [return\_value] = 0;
2 2) if ( [x] is greater than zero ) {
3
4 3) increment [return\_value];
5 4) logical shift [x] one bit to the right, padding the MSb with zero
6 5) repeat at step 2)
7
8 }
9
10 6) done

Examples:

  • ilog(0) = 0;
  • ilog(1) = 1;
  • ilog(2) = 2;
  • ilog(3) = 2;
  • ilog(4) = 3;
  • ilog(7) = 3;
  • ilog(negative number) = 0;

 

9.2.2. float32_unpack

”float32_unpack(x)” is intended to translate the packed binary representation of a Vorbis codebook float value into the representation used by the decoder for floating point numbers. For purposes of this example, we will unpack a Vorbis float32 into a host-native floating point number.

 

1 1) [mantissa] = [x] bitwise AND 0x1fffff (unsigned result)
2 2) [sign] = [x] bitwise AND 0x80000000 (unsigned result)
3 3) [exponent] = ( [x] bitwise AND 0x7fe00000) shifted right 21 bits (unsigned result)
4 4) if ( [sign] is nonzero ) then negate [mantissa]
5 5) return [mantissa] * ( 2 ^ ( [exponent] - 788 ) )

 

9.2.3. lookup1_values

”lookup1_values(codebook_entries,codebook_dimensions)” is used to compute the correct length of the value index for a codebook VQ lookup table of lookup type 1. The values on this list are permuted to construct the VQ vector lookup table of size[codebook_entries].

The return value for this function is defined to be ’the greatest integer value for which[return_value] to the power of [codebook_dimensions] is less than or equal to[codebook_entries]’.

 

9.2.4. low_neighbor

”low_neighbor(v,x)” finds the position n in vector [v] of the greatest value scalar element for which n is less than [x] and vector [v] element n is less than vector [v] element[x].

 

9.2.5. high_neighbor

”high_neighbor(v,x)” finds the position n in vector [v] of the lowest value scalar element for which n is less than [x] and vector [v] element n is greater than vector [v] element[x].

 

9.2.6. render_point

”render_point(x0,y0,x1,y1,X)” is used to find the Y value at point X along the line specified by x0, x1, y0 and y1. This function uses an integer algorithm to solve for the point directly without calculating intervening values along the line.

 

1 1) [dy] = [y1] - [y0]
2 2) [adx] = [x1] - [x0]
3 3) [ady] = absolute value of [dy]
4 4) [err] = [ady] * ([X] - [x0])
5 5) [off] = [err] / [adx] using integer division
6 6) if ( [dy] is less than zero ) {
7
8 7) [Y] = [y0] - [off]
9
10 } else {
11
12 8) [Y] = [y0] + [off]
13
14 }
15
16 9) done

 

9.2.7. render_line

Floor decode type one uses the integer line drawing algorithm of ”render_line(x0, y0, x1, y1, v)”to construct an integer floor curve for contiguous piecewise line segments. Note that it has not been relevant elsewhere, but here we must define integer division as rounding division of both positive and negative numbers toward zero.

 

1 1) [dy] = [y1] - [y0]
2 2) [adx] = [x1] - [x0]
3 3) [ady] = absolute value of [dy]
4 4) [base] = [dy] / [adx] using integer division
5 5) [x] = [x0]
6 6) [y] = [y0]
7 7) [err] = 0
8
9 8) if ( [dy] is less than 0 ) {
10
11 9) [sy] = [base] - 1
12
13 } else {
14
15 10) [sy] = [base] + 1
16
17 }
18
19 11) [ady] = [ady] - (absolute value of [base]) * [adx]
20 12) vector [v] element [x] = [y]
21
22 13) iterate [x] over the range [x0]+1 ... [x1]-1 {
23
24 14) [err] = [err] + [ady];
25 15) if ( [err] >= [adx] ) {
26
27 16) [err] = [err] - [adx]
28 17) [y] = [y] + [sy]
29
30 } else {
31
32 18) [y] = [y] + [base]
33
34 }
35
36 19) vector [v] element [x] = [y]
37
38 }

10. Tables

 

10.1. floor1_inverse_dB_table

The vector [floor1_inverse_dB_table] is a 256 element static lookup table consiting of the following values (read left to right then top to bottom):

 

1 1.0649863e-07, 1.1341951e-07, 1.2079015e-07, 1.2863978e-07,
2 1.3699951e-07, 1.4590251e-07, 1.5538408e-07, 1.6548181e-07,
3 1.7623575e-07, 1.8768855e-07, 1.9988561e-07, 2.1287530e-07,
4 2.2670913e-07, 2.4144197e-07, 2.5713223e-07, 2.7384213e-07,
5 2.9163793e-07, 3.1059021e-07, 3.3077411e-07, 3.5226968e-07,
6 3.7516214e-07, 3.9954229e-07, 4.2550680e-07, 4.5315863e-07,
7 4.8260743e-07, 5.1396998e-07, 5.4737065e-07, 5.8294187e-07,
8 6.2082472e-07, 6.6116941e-07, 7.0413592e-07, 7.4989464e-07,
9 7.9862701e-07, 8.5052630e-07, 9.0579828e-07, 9.6466216e-07,
10 1.0273513e-06, 1.0941144e-06, 1.1652161e-06, 1.2409384e-06,
11 1.3215816e-06, 1.4074654e-06, 1.4989305e-06, 1.5963394e-06,
12 1.7000785e-06, 1.8105592e-06, 1.9282195e-06, 2.0535261e-06,
13 2.1869758e-06, 2.3290978e-06, 2.4804557e-06, 2.6416497e-06,
14 2.8133190e-06, 2.9961443e-06, 3.1908506e-06, 3.3982101e-06,
15 3.6190449e-06, 3.8542308e-06, 4.1047004e-06, 4.3714470e-06,
16 4.6555282e-06, 4.9580707e-06, 5.2802740e-06, 5.6234160e-06,
17 5.9888572e-06, 6.3780469e-06, 6.7925283e-06, 7.2339451e-06,
18 7.7040476e-06, 8.2047000e-06, 8.7378876e-06, 9.3057248e-06,
19 9.9104632e-06, 1.0554501e-05, 1.1240392e-05, 1.1970856e-05,
20 1.2748789e-05, 1.3577278e-05, 1.4459606e-05, 1.5399272e-05,
21 1.6400004e-05, 1.7465768e-05, 1.8600792e-05, 1.9809576e-05,
22 2.1096914e-05, 2.2467911e-05, 2.3928002e-05, 2.5482978e-05,
23 2.7139006e-05, 2.8902651e-05, 3.0780908e-05, 3.2781225e-05,
24 3.4911534e-05, 3.7180282e-05, 3.9596466e-05, 4.2169667e-05,
25 4.4910090e-05, 4.7828601e-05, 5.0936773e-05, 5.4246931e-05,
26 5.7772202e-05, 6.1526565e-05, 6.5524908e-05, 6.9783085e-05,
27 7.4317983e-05, 7.9147585e-05, 8.4291040e-05, 8.9768747e-05,
28 9.5602426e-05, 0.00010181521, 0.00010843174, 0.00011547824,
29 0.00012298267, 0.00013097477, 0.00013948625, 0.00014855085,
30 0.00015820453, 0.00016848555, 0.00017943469, 0.00019109536,
31 0.00020351382, 0.00021673929, 0.00023082423, 0.00024582449,
32 0.00026179955, 0.00027881276, 0.00029693158, 0.00031622787,
33 0.00033677814, 0.00035866388, 0.00038197188, 0.00040679456,
34 0.00043323036, 0.00046138411, 0.00049136745, 0.00052329927,
35 0.00055730621, 0.00059352311, 0.00063209358, 0.00067317058,
36 0.00071691700, 0.00076350630, 0.00081312324, 0.00086596457,
37 0.00092223983, 0.00098217216, 0.0010459992, 0.0011139742,
38 0.0011863665, 0.0012634633, 0.0013455702, 0.0014330129,
39 0.0015261382, 0.0016253153, 0.0017309374, 0.0018434235,
40 0.0019632195, 0.0020908006, 0.0022266726, 0.0023713743,
41 0.0025254795, 0.0026895994, 0.0028643847, 0.0030505286,
42 0.0032487691, 0.0034598925, 0.0036847358, 0.0039241906,
43 0.0041792066, 0.0044507950, 0.0047400328, 0.0050480668,
44 0.0053761186, 0.0057254891, 0.0060975636, 0.0064938176,
45 0.0069158225, 0.0073652516, 0.0078438871, 0.0083536271,
46 0.0088964928, 0.009474637, 0.010090352, 0.010746080,
47 0.011444421, 0.012188144, 0.012980198, 0.013823725,
48 0.014722068, 0.015678791, 0.016697687, 0.017782797,
49 0.018938423, 0.020169149, 0.021479854, 0.022875735,
50 0.024362330, 0.025945531, 0.027631618, 0.029427276,
51 0.031339626, 0.033376252, 0.035545228, 0.037855157,
52 0.040315199, 0.042935108, 0.045725273, 0.048696758,
53 0.051861348, 0.055231591, 0.058820850, 0.062643361,
54 0.066714279, 0.071049749, 0.075666962, 0.080584227,
55 0.085821044, 0.091398179, 0.097337747, 0.10366330,
56 0.11039993, 0.11757434, 0.12521498, 0.13335215,
57 0.14201813, 0.15124727, 0.16107617, 0.17154380,
58 0.18269168, 0.19456402, 0.20720788, 0.22067342,
59 0.23501402, 0.25028656, 0.26655159, 0.28387361,
60 0.30232132, 0.32196786, 0.34289114, 0.36517414,
61 0.38890521, 0.41417847, 0.44109412, 0.46975890,
62 0.50028648, 0.53279791, 0.56742212, 0.60429640,
63 0.64356699, 0.68538959, 0.72993007, 0.77736504,
64 0.82788260, 0.88168307, 0.9389798, 1.

A. Embedding Vorbis into an Ogg stream

 

A.1. Overview

This document describes using Ogg logical and physical transport streams to encapsulate Vorbis compressed audio packet data into file form.

The Section 1, “Introduction and Description” provides an overview of the construction of Vorbis audio packets.

The Ogg bitstream overview and Ogg logical bitstream and framing spec provide detailed descriptions of Ogg transport streams. This specification document assumes a working knowledge of the concepts covered in these named backround documents. Please read them first.

 

A.1.1. Restrictions

The Ogg/Vorbis I specification currently dictates that Ogg/Vorbis streams use Ogg transport streams in degenerate, unmultiplexed form only. That is:

  • A meta-headerless Ogg file encapsulates the Vorbis I packets
  • The Ogg stream may be chained, i.e., contain multiple, contigous logical streams (links).
  • The Ogg stream must be unmultiplexed (only one stream, a Vorbis audio stream, per link)

This is not to say that it is not currently possible to multiplex Vorbis with other media types into a multi-stream Ogg file. At the time this document was written, Ogg was becoming a popular container for low-bitrate movies consisting of DivX video and Vorbis audio. However, a ’Vorbis I audio file’ is taken to imply Vorbis audio existing alone within a degenerate Ogg stream. A compliant ’Vorbis audio player’ is not required to implement Ogg support beyond the specific support of Vorbis within a degenrate Ogg stream (naturally, application authors are encouraged to support full multiplexed Ogg handling).

 

A.1.2. MIME type

The MIME type of Ogg files depend on the context. Specifically, complex multimedia and applications should use application/ogg, while visual media should use video/ogg, and audioaudio/ogg. Vorbis data encapsulated in Ogg may appear in any of those types. RTP encapsulated Vorbis should use audio/vorbis + audio/vorbis-config.

 

A.2. Encapsulation

Ogg encapsulation of a Vorbis packet stream is straightforward.

  • The first Vorbis packet (the identification header), which uniquely identifies a stream as Vorbis audio, is placed alone in the first page of the logical Ogg stream. This results in a first Ogg page of exactly 58 bytes at the very beginning of the logical stream.
  • This first page is marked ’beginning of stream’ in the page flags.
  • The second and third vorbis packets (comment and setup headers) may span one or more pages beginning on the second page of the logical stream. However many pages they span, the third header packet finishes the page on which it ends. The next (first audio) packet must begin on a fresh page.
  • The granule position of these first pages containing only headers is zero.
  • The first audio packet of the logical stream begins a fresh Ogg page.
  • Packets are placed into ogg pages in order until the end of stream.
  • The last page is marked ’end of stream’ in the page flags.
  • Vorbis packets may span page boundaries.
  • The granule position of pages containing Vorbis audio is in units of PCM audio samples (per channel; a stereo stream’s granule position does not increment at twice the speed of a mono stream).
  • The granule position of a page represents the end PCM sample position of the last packet completed on that page. The ’last PCM sample’ is the last complete sample returned by decode, not an internal sample awaiting lapping with a subsequent block. A page that is entirely spanned by a single packet (that completes on a subsequent page) has no granule position, and the granule position is set to ’-1’.

    Note that the last decoded (fully lapped) PCM sample from a packet is not necessarily the middle sample from that block. If, eg, the current Vorbis packet encodes a ”long block” and the next Vorbis packet encodes a ”short block”, the last decodable sample from the current packet be at position (3*long_block_length/4) - (short_block_length/4).

  • The granule (PCM) position of the first page need not indicate that the stream started at position zero. Although the granule position belongs to the last completed packet on the page and a valid granule position must be positive, by inference it may indicate that the PCM position of the beginning of audio is positive or negative.
    • A positive starting value simply indicates that this stream begins at some positive time offset, potentially within a larger program. This is a common case when connecting to the middle of broadcast stream.
    • A negative value indicates that output samples preceeding time zero should be discarded during decoding; this technique is used to allow sample-granularity editing of the stream start time of already-encoded Vorbis streams. The number of samples to be discarded must not exceed the overlap-add span of the first two audio packets.

    In both of these cases in which the initial audio PCM starting offset is nonzero, the second finished audio packet must flush the page on which it appears and the third packet begin a fresh page. This allows the decoder to always be able to perform PCM position adjustments before needing to return any PCM data from synthesis, resulting in correct positioning information without any aditional seeking logic.

    Note: Failure to do so should, at worst, cause a decoder implementation to return incorrect positioning information for seeking operations at the very beginning of the stream.

  • A granule position on the final page in a stream that indicates less audio data than the final packet would normally return is used to end the stream on other than even frame boundaries. The difference between the actual available data returned and the declared amount indicates how many trailing samples to discard from the decoding process.

B. Vorbis encapsulation in RTP

Please consult RFC 5215 “RTP Payload Format for Vorbis Encoded Audio” for description of how to embed Vorbis audio in an RTP stream.

Colophon

PIC

Ogg is a Xiph.Org Foundation effort to protect essential tenets of Internet multimedia from corporate hostage-taking; Open Source is the net’s greatest tool to keep everyone honest. SeeAbout the Xiph.Org Foundation for details.

Ogg Vorbis is the first Ogg audio CODEC. Anyone may freely use and distribute the Ogg and Vorbis specification, whether in a private, public or corporate capacity. However, the Xiph.Org Foundation and the Ogg project (xiph.org) reserve the right to set the Ogg Vorbis specification and certify specification compliance.

Xiph.Org’s Vorbis software CODEC implementation is distributed under a BSD-like license. This does not restrict third parties from distributing independent implementations of Vorbis software under other licenses.

Ogg, Vorbis, Xiph.Org Foundation and their logos are trademarks (tm) of the Xiph.Org Foundation. These pages are copyright (C) 1994-2007 Xiph.Org Foundation. All rights reserved.

This document is set using LATEX.

References

 

[1] T. Sporer, K. Brandenburg and B. Edler, The use of multirate filter banks for coding of high quality digital audio, http://www.iocon.com/resource/docs/ps/eusipco_corrected.ps.

 


登录 *


loading captcha image...
(输入验证码)
or Ctrl+Enter